Showing 19–36 of 1152 results
SIBRE chuyên cung cấp : Phanh an toàn SIBRE, Phanh chống bão SIBRE, Khớp nối SIBRE, Bánh xe cần cẩu SIBRE, Bộ giảm chấn SIBRE, Phanh tang trống SIBRE, Phanh đĩa SIBRE.
Chắc chắn An toàn. Khẩu hiệu và phương châm của SIBRE. Nhận thức được rằng tính mạng con người phụ thuộc vào môi trường làm việc an toàn nhất, ngay cả ở những nơi khắc nghiệt nhất, đội ngũ SIBRE liên tục thảo luận, tham khảo ý kiến, phân tích và kiểm chứng các ý tưởng để tạo ra các linh kiện và hệ thống mới.
SIBRE Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
SIBRE HGP Viet Nam
USB 5 V
Bremsmoment:
6.000 – 29.000 Nm
Spitzenhöhe:
280 mm
Gewicht:
285 kg
USB 5 III
Bremsmoment:
3.500 – 26.000 Nm
Spitzenhöhe:
370 mm
Gewicht:
250 kg
USB 5 II
Bremsmoment:
1.300 – 9.800 Nm
Spitzenhöhe:
280 mm
Gewicht:
175 kg
USB 5 I
Bremsmoment:
550 – 5.500 Nm
Spitzenhöhe:
230 mm
Gewicht:
85 kg
USB 5 05
Bremsmoment:
110 – 1400 Nm
Spitzenhöhe:
160 mm
Gewicht:
Disk Brake CB8 with electrohydraulic thruster EDC 100, solenoid or hydraulic cylinder available
Disk Brake CB6 with thruster EDC 100/30, fail-safe, electro-hydraulic release, sinter linings in the standard version
Sibre Imperial Drum Brake AISE
Sibre Imperial Drum Brake TE-I/TM-I
Sibre Imperial Drum Brake TEC
Sibre Imperial Drum Brake SBH
Sibre Imperial Drum Brake SBM
Sibre Imperial Drum Brake SBG
Sibre Imperial Drum Brake TMB
Sibre Imperial Drum Brake TPI
Sibre Imperial Drum Brake THI
Sibre Imperial Drum Brake TE-I
Sibre Imperial Drum Brake TE
Sibre Disc Brake SHI
Sibre Disc Brake TEXU
Sibre Disc Brake USB
Sibre Storm Brakes RTCB
Sibre Storm Brakes RHI
Sibre Storm Brakes RPS
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
SIBRE Việt Nam / Hotline : 0938 906 663
SIBRE chuyên cung cấp : Phanh an toàn SIBRE, Phanh chống bão SIBRE, Khớp nối SIBRE, Bánh xe cần cẩu SIBRE, Bộ giảm chấn SIBRE, Phanh tang trống SIBRE, Phanh đĩa SIBRE.
Chắc chắn An toàn. Khẩu hiệu và phương châm của SIBRE. Nhận thức được rằng tính mạng con người phụ thuộc vào môi trường làm việc an toàn nhất, ngay cả ở những nơi khắc nghiệt nhất, đội ngũ SIBRE liên tục thảo luận, tham khảo ý kiến, phân tích và kiểm chứng các ý tưởng để tạo ra các linh kiện và hệ thống mới.
SIBRE Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
SIBRE HGP Viet Nam
USB 5 V
Bremsmoment:
6.000 – 29.000 Nm
Spitzenhöhe:
280 mm
Gewicht:
285 kg
USB 5 III
Bremsmoment:
3.500 – 26.000 Nm
Spitzenhöhe:
370 mm
Gewicht:
250 kg
USB 5 II
Bremsmoment:
1.300 – 9.800 Nm
Spitzenhöhe:
280 mm
Gewicht:
175 kg
USB 5 I
Bremsmoment:
550 – 5.500 Nm
Spitzenhöhe:
230 mm
Gewicht:
85 kg
USB 5 05
Bremsmoment:
110 – 1400 Nm
Spitzenhöhe:
160 mm
Gewicht:
Disk Brake CB8 with electrohydraulic thruster EDC 100, solenoid or hydraulic cylinder available
Disk Brake CB6 with thruster EDC 100/30, fail-safe, electro-hydraulic release, sinter linings in the standard version
Sibre Imperial Drum Brake AISE
Sibre Imperial Drum Brake TE-I/TM-I
Sibre Imperial Drum Brake TEC
Sibre Imperial Drum Brake SBH
Sibre Imperial Drum Brake SBM
Sibre Imperial Drum Brake SBG
Sibre Imperial Drum Brake TMB
Sibre Imperial Drum Brake TPI
Sibre Imperial Drum Brake THI
Sibre Imperial Drum Brake TE-I
Sibre Imperial Drum Brake TE
Sibre Disc Brake SHI
Sibre Disc Brake TEXU
Sibre Disc Brake USB
Sibre Storm Brakes RTCB
Sibre Storm Brakes RHI
Sibre Storm Brakes RPS
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
SIBRE Việt Nam / Hotline : 0938 906 663
Monninghoff chuyên cung cấp : Ly hợp ma sát mặt cực điện từ Monninghoff , Ly hợp nhiều đĩa điện từ Monninghoff , Ly hợp răng điện từ Monninghoff , Bộ ly hợp răng điện từ Monninghoff , Bộ ly hợp răng điện từ lò xo Monninghoff , Phanh đa đĩa điện từ Monninghoff. Đại lý Monninghoff Việt Nam
Mönninghoff cung cấp một loạt các linh kiện chất lượng cao cho nhiều hệ thống truyền động khác nhau ICP cung cấp đầy đủ các loại ly hợp điện từ chính xác cao, ly hợp nhiều đĩa, ly hợp quá tải, ly hợp răng, khớp nối và bộ truyền động cuộn dây âm thanh.
Monninghoff Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Monninghoff HGP Viet Nam
Monninghoff Electromagnetic Pole Face Friction Clutch – 450
Monninghoff Electromagnetic Multiple-Disc Clutch – 501
Monninghoff Electromagnetic Multiple Disc Clutch – 502
Monninghoff Electromagnetic Multiple Disc Clutch – 521
Monninghoff Electromagnetic Multiple Disc Clutch – 522
Monninghoff Electromagnetic Tooth Clutch without Slip Ring – 543
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 544 Đại lý Monninghoff Việt Nam
Monninghoff Electromagnetic Tooth Clutch – 546
Monninghoff Electromagnetic Spring Applied Tooth Clutch – 547
Monninghoff Electromagnetic Spring Applied Tooth Clutch with Slip Ring – 548
Monninghoff Electromagnetic Tooth Clutch Backlash-free – 549
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 550
Monninghoff Pneumatic Spring Applied Tooth Clutch – 577
Monninghoff Pneumatic Tooth Clutch – 675
Monninghoff Pneumatic Tooth Clutch – 677
Monninghoff 512 Electromagnetic Multi-Disc Brake
Monninghoff 532 – Electromagnetic Multi-Disc Brake (ELKa)
Monninghoff Electromagnetic Tooth Holding Brake Type 560
Monninghoff ArcOflex Shaft Coupling – 314
Monninghoff ServoFlex Steel Coupling – 318 Đại lý Monninghoff Việt Nam
Monninghoff HexaFlex Coupling with Spacer Type 323
Monninghoff HexaFlex Flexible Shaft Coupling – 313
Monninghoff Multiplate Torque Limiter Type 581
Monninghoff SecMatic Coupling with Spring Plate Type 588
Monninghoff Pneumatic Tooth Holding Brake Type 679
Monninghoff Spring Applied Tooth Holding Brake Pneumatically Released Type 579
Type 543 – Electromagnetic tooth clutch – High torque
Type 544 – Electromagnetic tooth clutch – Slip ring
Type 546 – Electromagnetic tooth clutch
3D rendering of switchable clutch type 546 for product visualization
Type 547 – Electromagnetic tooth clutch – Spring-applied
3D-Darstellung eines Querschnitts der schaltbaren elektromagnetischen Kupplung Typ 547
Type 548 – Electromagnetic tooth clutch – Spring-applied with slip ring
3D image of the spring-loaded tooth clutch type 548
Type 549 – Electromagnetic tooth clutch – Backlash-free
High-resolution 3D visualization of an electromagnetic tooth clutch type 549 featuring detailed gears and magnetic parts
Type 550 – Electromagnetic tooth clutch – Slip ring
3D view of an electromagnetic tooth clutch type 550 featuring visible gear teeth and integrated magnetic systems
Type 556 – Bistable tooth clutch
Monninghoff Electromagnetic Pole Face Friction Clutch – 450
Monninghoff Electromagnetic Multiple-Disc Clutch – 501
Monninghoff Electromagnetic Multiple Disc Clutch – 502
Monninghoff Electromagnetic Multiple Disc Clutch – 521
Monninghoff Electromagnetic Multiple Disc Clutch – 522
Monninghoff Electromagnetic Tooth Clutch without Slip Ring – 543
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 544
Monninghoff Electromagnetic Tooth Clutch – 546
Monninghoff Electromagnetic Spring Applied Tooth Clutch – 547
Monninghoff Electromagnetic Spring Applied Tooth Clutch with Slip Ring – 548
Monninghoff Electromagnetic Tooth Clutch Backlash-free – 549
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 550
Monninghoff Pneumatic Spring Applied Tooth Clutch – 577
Monninghoff Pneumatic Tooth Clutch – 675 Đại lý Monninghoff Việt Nam
Monninghoff Pneumatic Tooth Clutch – 677
Monninghoff 512 Electromagnetic Multi-Disc Brake
Monninghoff 532 – Electromagnetic Multi-Disc Brake (ELKa)
Monninghoff Electromagnetic Tooth Holding Brake Type 560
Monninghoff ArcOflex Shaft Coupling – 314
Monninghoff ServoFlex Steel Coupling – 318
Monninghoff HexaFlex Coupling with Spacer Type 323
Monninghoff HexaFlex Flexible Shaft Coupling – 313
Monninghoff Multiplate Torque Limiter Type 581
Monninghoff SecMatic Coupling with Spring Plate Type 588
Monninghoff Pneumatic Tooth Holding Brake Type 679
Monninghoff Spring Applied Tooth Holding Brake Pneumatically Released Type 579
Type 543 – Electromagnetic tooth clutch – High torque
Type 544 – Electromagnetic tooth clutch – Slip ring
Type 546 – Electromagnetic tooth clutch
3D rendering of switchable clutch type 546 for product visualization
Type 547 – Electromagnetic tooth clutch – Spring-applied
3D-Darstellung eines Querschnitts der schaltbaren elektromagnetischen Kupplung Typ 547
Type 548 – Electromagnetic tooth clutch – Spring-applied with slip ring
3D image of the spring-loaded tooth clutch type 548
Type 549 – Electromagnetic tooth clutch – Backlash-free
High-resolution 3D visualization of an electromagnetic tooth clutch type 549 featuring detailed gears and magnetic parts
Type 550 – Electromagnetic tooth clutch – Slip ring
3D view of an electromagnetic tooth clutch type 550 featuring visible gear teeth and integrated magnetic systems
Type 556 – Bistable tooth clutch
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Monninghoff Việt Nam / Hotline : 0938 906 663
Monninghoff chuyên cung cấp : Ly hợp ma sát mặt cực điện từ Monninghoff , Ly hợp nhiều đĩa điện từ Monninghoff , Ly hợp răng điện từ Monninghoff , Bộ ly hợp răng điện từ Monninghoff , Bộ ly hợp răng điện từ lò xo Monninghoff , Phanh đa đĩa điện từ Monninghoff. Đại lý Monninghoff Việt Nam
Mönninghoff cung cấp một loạt các linh kiện chất lượng cao cho nhiều hệ thống truyền động khác nhau ICP cung cấp đầy đủ các loại ly hợp điện từ chính xác cao, ly hợp nhiều đĩa, ly hợp quá tải, ly hợp răng, khớp nối và bộ truyền động cuộn dây âm thanh.
Monninghoff Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Monninghoff HGP Viet Nam
Monninghoff Electromagnetic Pole Face Friction Clutch – 450
Monninghoff Electromagnetic Multiple-Disc Clutch – 501
Monninghoff Electromagnetic Multiple Disc Clutch – 502
Monninghoff Electromagnetic Multiple Disc Clutch – 521
Monninghoff Electromagnetic Multiple Disc Clutch – 522
Monninghoff Electromagnetic Tooth Clutch without Slip Ring – 543
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 544 Đại lý Monninghoff Việt Nam
Monninghoff Electromagnetic Tooth Clutch – 546
Monninghoff Electromagnetic Spring Applied Tooth Clutch – 547
Monninghoff Electromagnetic Spring Applied Tooth Clutch with Slip Ring – 548
Monninghoff Electromagnetic Tooth Clutch Backlash-free – 549
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 550
Monninghoff Pneumatic Spring Applied Tooth Clutch – 577
Monninghoff Pneumatic Tooth Clutch – 675
Monninghoff Pneumatic Tooth Clutch – 677
Monninghoff 512 Electromagnetic Multi-Disc Brake
Monninghoff 532 – Electromagnetic Multi-Disc Brake (ELKa)
Monninghoff Electromagnetic Tooth Holding Brake Type 560
Monninghoff ArcOflex Shaft Coupling – 314
Monninghoff ServoFlex Steel Coupling – 318 Đại lý Monninghoff Việt Nam
Monninghoff HexaFlex Coupling with Spacer Type 323
Monninghoff HexaFlex Flexible Shaft Coupling – 313
Monninghoff Multiplate Torque Limiter Type 581
Monninghoff SecMatic Coupling with Spring Plate Type 588
Monninghoff Pneumatic Tooth Holding Brake Type 679
Monninghoff Spring Applied Tooth Holding Brake Pneumatically Released Type 579
Type 543 – Electromagnetic tooth clutch – High torque
Type 544 – Electromagnetic tooth clutch – Slip ring
Type 546 – Electromagnetic tooth clutch
3D rendering of switchable clutch type 546 for product visualization
Type 547 – Electromagnetic tooth clutch – Spring-applied
3D-Darstellung eines Querschnitts der schaltbaren elektromagnetischen Kupplung Typ 547
Type 548 – Electromagnetic tooth clutch – Spring-applied with slip ring
3D image of the spring-loaded tooth clutch type 548
Type 549 – Electromagnetic tooth clutch – Backlash-free
High-resolution 3D visualization of an electromagnetic tooth clutch type 549 featuring detailed gears and magnetic parts
Type 550 – Electromagnetic tooth clutch – Slip ring
3D view of an electromagnetic tooth clutch type 550 featuring visible gear teeth and integrated magnetic systems
Type 556 – Bistable tooth clutch
Monninghoff Electromagnetic Pole Face Friction Clutch – 450
Monninghoff Electromagnetic Multiple-Disc Clutch – 501
Monninghoff Electromagnetic Multiple Disc Clutch – 502
Monninghoff Electromagnetic Multiple Disc Clutch – 521
Monninghoff Electromagnetic Multiple Disc Clutch – 522
Monninghoff Electromagnetic Tooth Clutch without Slip Ring – 543
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 544
Monninghoff Electromagnetic Tooth Clutch – 546
Monninghoff Electromagnetic Spring Applied Tooth Clutch – 547
Monninghoff Electromagnetic Spring Applied Tooth Clutch with Slip Ring – 548
Monninghoff Electromagnetic Tooth Clutch Backlash-free – 549
Monninghoff Electromagnetic Tooth Clutch with Slip Ring – 550
Monninghoff Pneumatic Spring Applied Tooth Clutch – 577
Monninghoff Pneumatic Tooth Clutch – 675 Đại lý Monninghoff Việt Nam
Monninghoff Pneumatic Tooth Clutch – 677
Monninghoff 512 Electromagnetic Multi-Disc Brake
Monninghoff 532 – Electromagnetic Multi-Disc Brake (ELKa)
Monninghoff Electromagnetic Tooth Holding Brake Type 560
Monninghoff ArcOflex Shaft Coupling – 314
Monninghoff ServoFlex Steel Coupling – 318
Monninghoff HexaFlex Coupling with Spacer Type 323
Monninghoff HexaFlex Flexible Shaft Coupling – 313
Monninghoff Multiplate Torque Limiter Type 581
Monninghoff SecMatic Coupling with Spring Plate Type 588
Monninghoff Pneumatic Tooth Holding Brake Type 679
Monninghoff Spring Applied Tooth Holding Brake Pneumatically Released Type 579
Type 543 – Electromagnetic tooth clutch – High torque
Type 544 – Electromagnetic tooth clutch – Slip ring
Type 546 – Electromagnetic tooth clutch
3D rendering of switchable clutch type 546 for product visualization
Type 547 – Electromagnetic tooth clutch – Spring-applied
3D-Darstellung eines Querschnitts der schaltbaren elektromagnetischen Kupplung Typ 547
Type 548 – Electromagnetic tooth clutch – Spring-applied with slip ring
3D image of the spring-loaded tooth clutch type 548
Type 549 – Electromagnetic tooth clutch – Backlash-free
High-resolution 3D visualization of an electromagnetic tooth clutch type 549 featuring detailed gears and magnetic parts
Type 550 – Electromagnetic tooth clutch – Slip ring
3D view of an electromagnetic tooth clutch type 550 featuring visible gear teeth and integrated magnetic systems
Type 556 – Bistable tooth clutch
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Monninghoff Việt Nam / Hotline : 0938 906 663
Intorq chuyên cung cấp : Phanh lò xo Intorq, Bộ ly hợp Intorq, Phanh điện từ Intorq. Đại lý Intorq Việt Nam
Sản phẩm Intorq được sử dụng trong nhiều ứng dụng đa dạng, từ động cơ phanh và xe nâng công nghiệp đến tời nâng, cần cẩu và tua bin gió.
Intorq Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Intorq HGP Viet Nam
14.105 and 14.115 Clutches and Brakes
Intorq 14.105 and 14.115 electromagnetic clutches and brakes can be used in flange or shaft mounted applications.
They transfer torque with no torsional backlash and have a very short run-in period.
14.105 and 14.115 clutches and brakes require little maintenance and have a long service life.
Torque range: 5.5 to 354 lb-ft (7.5 to 480 Nm) Đại lý Intorq Việt Nam
Typical applications: Packaging machinery, gates, printing machinery
BFK457 Brakes
The Intorq BFK457 brake is spring applied and electromagnetically released.
These failsafe brakes are a great fit for many applications, and feature integral fixing screws for quick and easy installation.
Torque range: 0.09 to 92 lb-ft (0.12 to 125 Nm)
Typical applications: Automation systems, hoists, material handling, wood working machinery
BFK458 Brakes
Intorq’s BFK458 brake is spring applied, electromagnetically released. A wide range of operating torques, standard voltages, and enclosures are available.
These brakes can also be fitted with an optional hand release.
Torque range: 1 to 442 lb-ft (1.5 to 600 Nm)
Typical applications: Cranes, stage machinery, brake motors, wood working machinery
BFK470 Brakes Đại lý Intorq Việt Nam
The Intorq BFK470 spring-applied, electromagnetically released brake is sealed by an IP66 enclosure.
Corrosion protection of up to class C5 is available.
The Cold Climate Version can operate in temperatures as low as -40° C (-40° F).
Torque range: 1.5 to 272 lb-ft (2 to 370 Nm)
Typical applications: Wind turbines, cranes, hoists, textile machinery
Lenze Intorq BFK471 Spring Applied Brake
Lenze Intorq BFK470 Spring Applied Brakes
Lenze Intorq BFK468 Spring Applied Brakes
Lenze Intorq BFK461 Spring Applied Brakes
Lenze Intorq BFK458 Spring Applied Brakes
Lenze Intorq BFK457 Spring Applied Brakes
Intorq Electrical Accessories
Intorq Electromagnetic Clutch-Brakes – 14.800
Intorq Electromagnetic Clutch and Brake 14.105 & 14.115
INTORQ BFK 458 L
14.105 and 14.115 Clutches and Brakes
Intorq 14.105 and 14.115 electromagnetic clutches and brakes can be used in flange or shaft mounted applications.
They transfer torque with no torsional backlash and have a very short run-in period.
14.105 and 14.115 clutches and brakes require little maintenance and have a long service life.
Torque range: 5.5 to 354 lb-ft (7.5 to 480 Nm)
Typical applications: Packaging machinery, gates, printing machinery
BFK457 Brakes
The Intorq BFK457 brake is spring applied and electromagnetically released.
These failsafe brakes are a great fit for many applications, and feature integral fixing screws for quick and easy installation.
Torque range: 0.09 to 92 lb-ft (0.12 to 125 Nm)
Typical applications: Automation systems, hoists, material handling, wood working machinery
BFK458 Brakes Đại lý Intorq Việt Nam
Intorq’s BFK458 brake is spring applied, electromagnetically released. A wide range of operating torques, standard voltages, and enclosures are available.
These brakes can also be fitted with an optional hand release.
Torque range: 1 to 442 lb-ft (1.5 to 600 Nm)
Typical applications: Cranes, stage machinery, brake motors, wood working machinery
BFK470 Brakes
The Intorq BFK470 spring-applied, electromagnetically released brake is sealed by an IP66 enclosure.
Corrosion protection of up to class C5 is available.
The Cold Climate Version can operate in temperatures as low as -40° C (-40° F).
Torque range: 1.5 to 272 lb-ft (2 to 370 Nm)
Typical applications: Wind turbines, cranes, hoists, textile machinery
Lenze Intorq BFK471 Spring Applied Brake
Lenze Intorq BFK470 Spring Applied Brakes
Lenze Intorq BFK468 Spring Applied Brakes
Lenze Intorq BFK461 Spring Applied Brakes
Lenze Intorq BFK458 Spring Applied Brakes
Lenze Intorq BFK457 Spring Applied Brakes
Intorq Electrical Accessories
Intorq Electromagnetic Clutch-Brakes – 14.800
Intorq Electromagnetic Clutch and Brake 14.105 & 14.115
INTORQ BFK 458 L
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Intorq Việt Nam / Hotline : 0938 906 663
Intorq chuyên cung cấp : Phanh lò xo Intorq, Bộ ly hợp Intorq, Phanh điện từ Intorq. Đại lý Intorq Việt Nam
Sản phẩm Intorq được sử dụng trong nhiều ứng dụng đa dạng, từ động cơ phanh và xe nâng công nghiệp đến tời nâng, cần cẩu và tua bin gió.
Intorq Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Intorq HGP Viet Nam
14.105 and 14.115 Clutches and Brakes
Intorq 14.105 and 14.115 electromagnetic clutches and brakes can be used in flange or shaft mounted applications.
They transfer torque with no torsional backlash and have a very short run-in period.
14.105 and 14.115 clutches and brakes require little maintenance and have a long service life.
Torque range: 5.5 to 354 lb-ft (7.5 to 480 Nm) Đại lý Intorq Việt Nam
Typical applications: Packaging machinery, gates, printing machinery
BFK457 Brakes
The Intorq BFK457 brake is spring applied and electromagnetically released.
These failsafe brakes are a great fit for many applications, and feature integral fixing screws for quick and easy installation.
Torque range: 0.09 to 92 lb-ft (0.12 to 125 Nm)
Typical applications: Automation systems, hoists, material handling, wood working machinery
BFK458 Brakes
Intorq’s BFK458 brake is spring applied, electromagnetically released. A wide range of operating torques, standard voltages, and enclosures are available.
These brakes can also be fitted with an optional hand release.
Torque range: 1 to 442 lb-ft (1.5 to 600 Nm)
Typical applications: Cranes, stage machinery, brake motors, wood working machinery
BFK470 Brakes Đại lý Intorq Việt Nam
The Intorq BFK470 spring-applied, electromagnetically released brake is sealed by an IP66 enclosure.
Corrosion protection of up to class C5 is available.
The Cold Climate Version can operate in temperatures as low as -40° C (-40° F).
Torque range: 1.5 to 272 lb-ft (2 to 370 Nm)
Typical applications: Wind turbines, cranes, hoists, textile machinery
Lenze Intorq BFK471 Spring Applied Brake
Lenze Intorq BFK470 Spring Applied Brakes
Lenze Intorq BFK468 Spring Applied Brakes
Lenze Intorq BFK461 Spring Applied Brakes
Lenze Intorq BFK458 Spring Applied Brakes
Lenze Intorq BFK457 Spring Applied Brakes
Intorq Electrical Accessories
Intorq Electromagnetic Clutch-Brakes – 14.800
Intorq Electromagnetic Clutch and Brake 14.105 & 14.115
INTORQ BFK 458 L
14.105 and 14.115 Clutches and Brakes
Intorq 14.105 and 14.115 electromagnetic clutches and brakes can be used in flange or shaft mounted applications.
They transfer torque with no torsional backlash and have a very short run-in period.
14.105 and 14.115 clutches and brakes require little maintenance and have a long service life.
Torque range: 5.5 to 354 lb-ft (7.5 to 480 Nm)
Typical applications: Packaging machinery, gates, printing machinery
BFK457 Brakes
The Intorq BFK457 brake is spring applied and electromagnetically released.
These failsafe brakes are a great fit for many applications, and feature integral fixing screws for quick and easy installation.
Torque range: 0.09 to 92 lb-ft (0.12 to 125 Nm)
Typical applications: Automation systems, hoists, material handling, wood working machinery
BFK458 Brakes Đại lý Intorq Việt Nam
Intorq’s BFK458 brake is spring applied, electromagnetically released. A wide range of operating torques, standard voltages, and enclosures are available.
These brakes can also be fitted with an optional hand release.
Torque range: 1 to 442 lb-ft (1.5 to 600 Nm)
Typical applications: Cranes, stage machinery, brake motors, wood working machinery
BFK470 Brakes
The Intorq BFK470 spring-applied, electromagnetically released brake is sealed by an IP66 enclosure.
Corrosion protection of up to class C5 is available.
The Cold Climate Version can operate in temperatures as low as -40° C (-40° F).
Torque range: 1.5 to 272 lb-ft (2 to 370 Nm)
Typical applications: Wind turbines, cranes, hoists, textile machinery
Lenze Intorq BFK471 Spring Applied Brake
Lenze Intorq BFK470 Spring Applied Brakes
Lenze Intorq BFK468 Spring Applied Brakes
Lenze Intorq BFK461 Spring Applied Brakes
Lenze Intorq BFK458 Spring Applied Brakes
Lenze Intorq BFK457 Spring Applied Brakes
Intorq Electrical Accessories
Intorq Electromagnetic Clutch-Brakes – 14.800
Intorq Electromagnetic Clutch and Brake 14.105 & 14.115
INTORQ BFK 458 L
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Intorq Việt Nam / Hotline : 0938 906 663
Hilliard chuyên cung cấp : Bộ ly hợp ly tâm Hilliard, Bộ giới hạn mô-men xoắn ma sát Hilliard, Bộ ly hợp ly tâm chịu tải cực cao Hilliard, Hộp số biến thiên liên tục Hilliard, Bộ ly hợp truyền động Hilliard, Bộ ly hợp bánh răng Hilliard. Đại lý Hilliard Việt Nam
Được thành lập vào năm 1905, Tập đoàn Hilliard đã phát triển từ một doanh nghiệp chỉ sản xuất một sản phẩm thành một công ty kỹ thuật ứng dụng đặc biệt phục vụ khách hàng trên toàn thế giới.
Hilliard Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Hilliard HGP Viet Nam
Hilliard Starter Clutch Drive Assembly
Code: Hilliard Starter Clutch Drive Đại lý Hilliard Việt Nam
Industrial Clutch Parts Ltd. supplies a complete range of Hilliard starter clutch drives.
Manufactured as a high-speed overrunning clutch designed to provide positive engagement and high torque on demand.
Hilliard high-speed overrunning starter drives disengage automatically and maintain high torque whilst engaged, offering an efficient and high-quality performance for your machine.
Torque: 373 – 1,253 Nm
Max. speed: 16,000 – 10,000 rpm
Bore size: 25.4 – 38.1 mm
Hilliard Extreme Duty Centrifugal Clutch Đại lý Hilliard Việt Nam
Code: Hilliard Extreme Duty Centrifugal Clutch
Industrial Clutch Parts Ltd. supplies Hilliard extreme duty centrifugal clutches.
Engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications.
Hilliard’s extreme duty centrifugal clutch is manufactured in a thermodynamic designed shoe to increase the clutch capacity and absorb heat without damaging the integrity of the clutch.
Sprocket rating: 6 kW
Pulley rating: 9.5 kW
Hilliard Linkless Centrifugal Clutch
Code: Hilliard Linkless Centrifugal Clutch
Industrial Clutch Parts Ltd. supplies a complete range of Hilliard linkless centrifugal clutches.
Available in various sizes, with a wide range of choices, from common mounts to custom designs.
Hilliard linkless centrifugal clutches provide automatic, gradual and cushioned engagement over a speed range on high-inertia loads. Benefits include soft starts, load-free starting and overload protection.
Best suited for applications such as fans, blowers, conveyor drives and mills.
Bore size: 28.5 – 36.5 mm
Rating: 37 kW
Hilliard Industrial Centrifugal Clutch
Code: Hilliard Industrial Centrifugal Clutch
Industrial Clutch Parts Ltd. supplies a complete range of Hilliard industrial centrifugal clutches.
Available in various sizes, suitable for applications requiring improved starting conditions and smooth acceleration.
Hilliard industrial centrifugal clutches have been designed to provide automatic, gradual and cushioned engagement over a speed range on high-inertia loads.
They protect machines against overload by limiting torque, absorbing shock and eliminating torsional resonance.
Bore size: 15.9 – 203.2 mm Đại lý Hilliard Việt Nam
Rating: up to 1,194 kW
Size range: 42 – 3012
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Hilliard Việt Nam / Hotline : 0938 906 663
Hilliard chuyên cung cấp : Bộ ly hợp ly tâm Hilliard, Bộ giới hạn mô-men xoắn ma sát Hilliard, Bộ ly hợp ly tâm chịu tải cực cao Hilliard, Hộp số biến thiên liên tục Hilliard, Bộ ly hợp truyền động Hilliard, Bộ ly hợp bánh răng Hilliard. Đại lý Hilliard Việt Nam
Được thành lập vào năm 1905, Tập đoàn Hilliard đã phát triển từ một doanh nghiệp chỉ sản xuất một sản phẩm thành một công ty kỹ thuật ứng dụng đặc biệt phục vụ khách hàng trên toàn thế giới.
Hilliard Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Hilliard HGP Viet Nam
Hilliard Starter Clutch Drive Assembly
Code: Hilliard Starter Clutch Drive Đại lý Hilliard Việt Nam
Industrial Clutch Parts Ltd. supplies a complete range of Hilliard starter clutch drives.
Manufactured as a high-speed overrunning clutch designed to provide positive engagement and high torque on demand.
Hilliard high-speed overrunning starter drives disengage automatically and maintain high torque whilst engaged, offering an efficient and high-quality performance for your machine.
Torque: 373 – 1,253 Nm
Max. speed: 16,000 – 10,000 rpm
Bore size: 25.4 – 38.1 mm
Hilliard Extreme Duty Centrifugal Clutch Đại lý Hilliard Việt Nam
Code: Hilliard Extreme Duty Centrifugal Clutch
Industrial Clutch Parts Ltd. supplies Hilliard extreme duty centrifugal clutches.
Engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications.
Hilliard’s extreme duty centrifugal clutch is manufactured in a thermodynamic designed shoe to increase the clutch capacity and absorb heat without damaging the integrity of the clutch.
Sprocket rating: 6 kW
Pulley rating: 9.5 kW
Hilliard Linkless Centrifugal Clutch
Code: Hilliard Linkless Centrifugal Clutch
Industrial Clutch Parts Ltd. supplies a complete range of Hilliard linkless centrifugal clutches.
Available in various sizes, with a wide range of choices, from common mounts to custom designs.
Hilliard linkless centrifugal clutches provide automatic, gradual and cushioned engagement over a speed range on high-inertia loads. Benefits include soft starts, load-free starting and overload protection.
Best suited for applications such as fans, blowers, conveyor drives and mills.
Bore size: 28.5 – 36.5 mm
Rating: 37 kW
Hilliard Industrial Centrifugal Clutch
Code: Hilliard Industrial Centrifugal Clutch
Industrial Clutch Parts Ltd. supplies a complete range of Hilliard industrial centrifugal clutches.
Available in various sizes, suitable for applications requiring improved starting conditions and smooth acceleration.
Hilliard industrial centrifugal clutches have been designed to provide automatic, gradual and cushioned engagement over a speed range on high-inertia loads.
They protect machines against overload by limiting torque, absorbing shock and eliminating torsional resonance.
Bore size: 15.9 – 203.2 mm Đại lý Hilliard Việt Nam
Rating: up to 1,194 kW
Size range: 42 – 3012
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Hilliard Việt Nam / Hotline : 0938 906 663
Gummi chuyên cung cấp : Khớp nối Gummi, Ly hợp Gummi và Phanh khí nén Gummi. Đại lý Gummi Việt Nam
Kể từ khi thành lập vào năm 1968, Gummi đã phát triển thành một công ty hàng đầu toàn cầu trong lĩnh vực sản xuất, tiếp thị và phân phối trong ngành công nghiệp truyền động, trở thành một trong những nhà sản xuất lớn nhất về khớp nối, ly hợp và phanh khí nén.
Gummi Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Gummi HGP Viet Nam
Gummi Air Clutch & Drum Brake – Type LT
Gummi Air Clutch – Type DX
Gummi Marine Clutch – Type FM
Gummi Air Clutch & Drum Brake – Type FKT
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Air Clutch & Drum Brake – Type FKE
Gummi Air Clutch & Drum Brake – Type FK
Gummi Hydraulic Coupling – Type HSD
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Quick Release Valve (QRV)
Gummi Rotorseals
Gummi Air Clutch & Drum Brake – Type LT
Code: Type LT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi LT is an oilfield clutch. Similar to the FK and FKT in design and construction, the LT is used primarily on drilling equipment manufactured in China, Russia, and Romania.
Gummi Air Clutch – Type DX Đại lý Gummi Việt Nam
Code: Gummi DX
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi DX Air Clutches are designed and manufactured to be utilised as high and low drum shaft clutches on draw-works.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FM air clutch and drum brake are purposefully built for marine applications.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi Air Clutch & Drum Brake – Type FKT
Code: Type FKT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FKT is manufactured for extra heavy load applications, operating in the most extreme working conditions.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Gummi Air Clutch & Drum Brake – Type FKE
Code: Gummi FKE Đại lý Gummi Việt Nam
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKE is an expanding version of the FK unit. Best suited for low-speed applications, with smooth starting and stopping loads.
Gummi Air Clutch & Drum Brake – Type FK
Code: Type FK
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FK constricting drum clutch is perfect for high speed, low to medium torque applications where high heat generation is not a factor.
Gummi Hydraulic Coupling – Type HSD
Code: Gummi Type HSD
Industrial Clutch Parts Ltd. distribute a number of Gummi Couplings.
Type HSD is a fluid filled hydraulic coupling, usually applied as a way of controlling the transmitted torque of the prime mover in a drive system.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Gummi Việt Nam / Hotline : 0938 906 663
Gummi chuyên cung cấp : Khớp nối Gummi, Ly hợp Gummi và Phanh khí nén Gummi. Đại lý Gummi Việt Nam
Kể từ khi thành lập vào năm 1968, Gummi đã phát triển thành một công ty hàng đầu toàn cầu trong lĩnh vực sản xuất, tiếp thị và phân phối trong ngành công nghiệp truyền động, trở thành một trong những nhà sản xuất lớn nhất về khớp nối, ly hợp và phanh khí nén.
Gummi Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Gummi HGP Viet Nam
Gummi Air Clutch & Drum Brake – Type LT
Gummi Air Clutch – Type DX
Gummi Marine Clutch – Type FM
Gummi Air Clutch & Drum Brake – Type FKT
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Air Clutch & Drum Brake – Type FKE
Gummi Air Clutch & Drum Brake – Type FK
Gummi Hydraulic Coupling – Type HSD
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Quick Release Valve (QRV)
Gummi Rotorseals
Gummi Air Clutch & Drum Brake – Type LT
Code: Type LT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi LT is an oilfield clutch. Similar to the FK and FKT in design and construction, the LT is used primarily on drilling equipment manufactured in China, Russia, and Romania.
Gummi Air Clutch – Type DX Đại lý Gummi Việt Nam
Code: Gummi DX
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi DX Air Clutches are designed and manufactured to be utilised as high and low drum shaft clutches on draw-works.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FM air clutch and drum brake are purposefully built for marine applications.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi Air Clutch & Drum Brake – Type FKT
Code: Type FKT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FKT is manufactured for extra heavy load applications, operating in the most extreme working conditions.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Gummi Air Clutch & Drum Brake – Type FKE
Code: Gummi FKE Đại lý Gummi Việt Nam
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKE is an expanding version of the FK unit. Best suited for low-speed applications, with smooth starting and stopping loads.
Gummi Air Clutch & Drum Brake – Type FK
Code: Type FK
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FK constricting drum clutch is perfect for high speed, low to medium torque applications where high heat generation is not a factor.
Gummi Hydraulic Coupling – Type HSD
Code: Gummi Type HSD
Industrial Clutch Parts Ltd. distribute a number of Gummi Couplings.
Type HSD is a fluid filled hydraulic coupling, usually applied as a way of controlling the transmitted torque of the prime mover in a drive system.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Gummi Việt Nam / Hotline : 0938 906 663
EMG chuyên cung cấp : Bộ truyền động EMG, Bộ điều khiển phanh EMG, Bộ truyền động điện thủy lực EMG. Đại lý EMG Việt Nam
EMG Automation GmbH, một công ty thuộc tập đoàn elexis, chuyên phát triển và cung cấp các giải pháp tự động hóa và đảm bảo chất lượng cho quy trình sản xuất cũng như các linh kiện an toàn ELDRO® & ELHY®.
EMG Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
EMG HGP Viet Nam
EMG ELDROclassic®
EMG ELDRO® New Generation
EMG ELDRO® Ex
EMG ELDROdynamic®
EMG ELDRO® direct current
EMG ELHY®
Eldro Electro-Hydraulic Thruster – Standard Series Ed630/9
Code: Eldro Ed630/9
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed630/9 Technical Values:
Lifting Torque: 6300 N
Stroke Path: 80 – 120 mm
Power Consumption: 700 w
Eldro Electro-Hydraulic Thruster Ed301/6
Code: Eldro Ed301/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Ed301/6 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 2000 N
Stroke: 60 mm
Power Consumption: 450 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed80/6
Code: Eldro Ed80/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro Ed80/6 electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 3500 N
Stroke: 200 mm
Power Consumption: 550 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed30/5
Code: Eldro Ed30/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed30/5 Technical Values:
Lifting Force: 500 N
Stroke: 60 mm
Power Consumption: 210 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed12/4
Code: Eldro Ed12/4
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Ed12/4 Technical Values:
Lifting Force: 120 N
Stroke Path: 40 mm
Temp Range: -25 °C up to +50 °C
Eldro Electro-Hydraulic Thruster – Standard Series Ed23/5
Code: Eldro Ed23/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed23/5 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 220 N
Stroke Path: 50 mm
Temp Range: -25 °C up to +50 °C
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
EMG Việt Nam / Hotline : 0938 906 663
EMG chuyên cung cấp : Bộ truyền động EMG, Bộ điều khiển phanh EMG, Bộ truyền động điện thủy lực EMG. Đại lý EMG Việt Nam
EMG Automation GmbH, một công ty thuộc tập đoàn elexis, chuyên phát triển và cung cấp các giải pháp tự động hóa và đảm bảo chất lượng cho quy trình sản xuất cũng như các linh kiện an toàn ELDRO® & ELHY®.
EMG Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
EMG HGP Viet Nam
EMG ELDROclassic®
EMG ELDRO® New Generation
EMG ELDRO® Ex
EMG ELDROdynamic®
EMG ELDRO® direct current
EMG ELHY®
Eldro Electro-Hydraulic Thruster – Standard Series Ed630/9
Code: Eldro Ed630/9
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed630/9 Technical Values:
Lifting Torque: 6300 N
Stroke Path: 80 – 120 mm
Power Consumption: 700 w
Eldro Electro-Hydraulic Thruster Ed301/6
Code: Eldro Ed301/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Ed301/6 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 2000 N
Stroke: 60 mm
Power Consumption: 450 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed80/6
Code: Eldro Ed80/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro Ed80/6 electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 3500 N
Stroke: 200 mm
Power Consumption: 550 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed30/5
Code: Eldro Ed30/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed30/5 Technical Values:
Lifting Force: 500 N
Stroke: 60 mm
Power Consumption: 210 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed12/4
Code: Eldro Ed12/4
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Ed12/4 Technical Values:
Lifting Force: 120 N
Stroke Path: 40 mm
Temp Range: -25 °C up to +50 °C
Eldro Electro-Hydraulic Thruster – Standard Series Ed23/5
Code: Eldro Ed23/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed23/5 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 220 N
Stroke Path: 50 mm
Temp Range: -25 °C up to +50 °C
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
EMG Việt Nam / Hotline : 0938 906 663
Eide chuyên cung cấp : Phanh an toàn Eide, Phanh Eide, Ly hợp Eide, Bộ ly hợp Eide, Bộ giới hạn mô-men xoắn Eide, Khớp nối Eide. Đại lý Eide Việt Nam
Eide sản xuất một loạt các ly hợp, phanh và thiết bị truyền động theo yêu cầu. Thiết bị sản xuất nội bộ của Eide cho phép triển khai nhanh chóng, đáng tin cậy và an toàn các giải pháp hoàn chỉnh tùy chỉnh.
Eide Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Eide HGP Viet Nam
FPC-500
FPC-1000
FPC-3500 Đại lý Eide Việt Nam
FPC-6000
FPC Progressive Safety Gear (Parachute Brake)
The FPC safety brake is an overspeed-triggered protection system designed for vertical transport. It engages exclusively when the descent speed exceeds a pre-calibrated threshold, arresting the platform’s movement in a cushioned and progressive manner. It is the global engineering standard for preventing free-fall accidents in industrial lifts and hoists.
EC Centrifugal Brake
Engineered for passive speed control, the EC brake intervenes autonomously during motor failure or loss of descent control. Operating purely on centrifugal force, it requires no external power source, making it the ideal fail-safe component for ensuring a constant, controlled descent speed during emergency gravity drops.
DBQ Centrifugal Brake Đại lý Eide Việt Nam
The DBQ model merges the reliability of centrifugal braking with superior operational versatility. While it limits descent speed during motor faults, it features a strategic manual override capability, allowing the brake to be disabled when specific manoeuvres are required. It perfectly balances automated safety with technical flexibility.
FNB Negative Pneumatic Brake
The FNB brake operates on the fail-safe principle: braking is applied via spring pressure and released only when pneumatic pressure is present. Designed for both horizontal and vertical shafts, it stands out for its zero residual torque and instantaneous response time, significantly optimising machine duty cycles.
EIDE specialises in the design and manufacture of industrial brakes, both pneumatic and electromagnetic. Đại lý Eide Việt Nam
BrakesBrakespneumatic brakeBrakesBrakesBrakesBrakesBrakes
Pneumatic brakes use compressed air as the driving medium, which gives them an important advantage: the braking torque is proportional to the pressure applied.
The FNA pneumatic brake is a positive brake for horizontal shaft work, very reliable and with good heat dissipation, fast response speed and minimum residual torque.
The FNAM pneumatic brake, a negative brake, provides a safe stop and can brake moving masses or loads.
The FNH pneumatic brake can be used continuously because the brake disc has a radiator with high heat dissipation capacity. Đại lý Eide Việt Nam
The FNC pneumatic brake is designed to work in continuous friction with very little wear and without generating vibrations or noise.
Electromagnetic brakes, on the other hand, use the force created by an electromagnet to brake an armature disc and, although they do not allow the braking torque to be regulated according to the voltage applied, they have a fixed braking torque.
The FAE electromagnetic brake consists of the armature with the friction material and the rotor, which in turn is formed by the armature with the spring-membrane.
The FAE/M electromagnetic brake is a brake that acts when no direct current is applied and is particularly suitable for safety applications.
One of the advantages of the electromagnetic brake with permanent magnet FIP is that it has no residual torque once it is released.
The FAET electromagnetic brake consists of the armature with the friction material and the rotor, which in turn consists of the armature, the radiator and the bushing.
At EIDE, we offer a comprehensive range of brakes for various industrial applications, providing a reliable and effective solution to protect workers and machinery.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Eide Việt Nam / Hotline : 0938 906 663
Eide chuyên cung cấp : Phanh an toàn Eide, Phanh Eide, Ly hợp Eide, Bộ ly hợp Eide, Bộ giới hạn mô-men xoắn Eide, Khớp nối Eide. Đại lý Eide Việt Nam
Eide sản xuất một loạt các ly hợp, phanh và thiết bị truyền động theo yêu cầu. Thiết bị sản xuất nội bộ của Eide cho phép triển khai nhanh chóng, đáng tin cậy và an toàn các giải pháp hoàn chỉnh tùy chỉnh.
Eide Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Eide HGP Viet Nam
FPC-500
FPC-1000
FPC-3500 Đại lý Eide Việt Nam
FPC-6000
FPC Progressive Safety Gear (Parachute Brake)
The FPC safety brake is an overspeed-triggered protection system designed for vertical transport. It engages exclusively when the descent speed exceeds a pre-calibrated threshold, arresting the platform’s movement in a cushioned and progressive manner. It is the global engineering standard for preventing free-fall accidents in industrial lifts and hoists.
EC Centrifugal Brake
Engineered for passive speed control, the EC brake intervenes autonomously during motor failure or loss of descent control. Operating purely on centrifugal force, it requires no external power source, making it the ideal fail-safe component for ensuring a constant, controlled descent speed during emergency gravity drops.
DBQ Centrifugal Brake Đại lý Eide Việt Nam
The DBQ model merges the reliability of centrifugal braking with superior operational versatility. While it limits descent speed during motor faults, it features a strategic manual override capability, allowing the brake to be disabled when specific manoeuvres are required. It perfectly balances automated safety with technical flexibility.
FNB Negative Pneumatic Brake
The FNB brake operates on the fail-safe principle: braking is applied via spring pressure and released only when pneumatic pressure is present. Designed for both horizontal and vertical shafts, it stands out for its zero residual torque and instantaneous response time, significantly optimising machine duty cycles.
EIDE specialises in the design and manufacture of industrial brakes, both pneumatic and electromagnetic. Đại lý Eide Việt Nam
BrakesBrakespneumatic brakeBrakesBrakesBrakesBrakesBrakes
Pneumatic brakes use compressed air as the driving medium, which gives them an important advantage: the braking torque is proportional to the pressure applied.
The FNA pneumatic brake is a positive brake for horizontal shaft work, very reliable and with good heat dissipation, fast response speed and minimum residual torque.
The FNAM pneumatic brake, a negative brake, provides a safe stop and can brake moving masses or loads.
The FNH pneumatic brake can be used continuously because the brake disc has a radiator with high heat dissipation capacity. Đại lý Eide Việt Nam
The FNC pneumatic brake is designed to work in continuous friction with very little wear and without generating vibrations or noise.
Electromagnetic brakes, on the other hand, use the force created by an electromagnet to brake an armature disc and, although they do not allow the braking torque to be regulated according to the voltage applied, they have a fixed braking torque.
The FAE electromagnetic brake consists of the armature with the friction material and the rotor, which in turn is formed by the armature with the spring-membrane.
The FAE/M electromagnetic brake is a brake that acts when no direct current is applied and is particularly suitable for safety applications.
One of the advantages of the electromagnetic brake with permanent magnet FIP is that it has no residual torque once it is released.
The FAET electromagnetic brake consists of the armature with the friction material and the rotor, which in turn consists of the armature, the radiator and the bushing.
At EIDE, we offer a comprehensive range of brakes for various industrial applications, providing a reliable and effective solution to protect workers and machinery.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Eide Việt Nam / Hotline : 0938 906 663
Deserti Meccanica chuyên cung cấp : Bộ giới hạn mô-men xoắn Deserti Meccanica, Phanh điện từ Deserti Meccanica, Ròng rọc Deserti Meccanica, Khớp nối Deserti Meccanica, Vòng đệm Deserti Meccanica, Đĩa ma sát Deserti Meccanica. Đại lý Deserti Meccanica Việt Nam
Deserti Meccanica cung cấp một loạt các bộ giới hạn momen xoắn cả cơ khí và khí nén để đáp ứng mọi nhu cầu. Luôn chú trọng đến sự phát triển của thị trường và nhu cầu của khách hàng, Deserti Meccanica đã mở rộng dòng sản phẩm bộ giới hạn momen xoắn với một loại sản phẩm mới quan trọng: Năm 2000, công ty một lần nữa tiên phong trên thị trường khi là công ty Ý đầu tiên sản xuất và tiếp thị bộ giới hạn momen xoắn “KHÔNG CÓ ĐỘ RƠ” hướng tâm và xoắn.
Deserti Meccanica Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Deserti Meccanica HGP Viet Nam
LS Series
LASS Series
LASS AIR Series
SGR Series Đại lý Deserti Meccanica Việt Nam
DM SM PM Series
LINEAR series
MICRO DAMM Series
GS Series
Deserti Backlash Free Torque Limiter SGR Series
Code: SGR-Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
Torque limiters of the “backlash-free” series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload but where it is recommended to maintain a fixed and determined point of transmission.
Deserti Torque Limiter LS Series
Code: LS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
The friction torque limiters allow immediate release from the excess torque applied to the transmission; they do not need resetting and permit a direct visual inspection of operating conditions.
Deserti Torque Limiter Lass Air Series
Code: Lass Air Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The pneumatically operated series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter Lass Series
Code: Lass Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter
Code: DGZ-ZGS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload.
Radial/torsional value=0 during the transmission of motion.
No residual torque after disengagement. Đại lý Deserti Meccanica Việt Nam
Possibility of combining a switch/proximity to stop the engine.
High sensitivity and maintenance free.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Deserti Meccanica Việt Nam / Hotline : 0938 906 663
Deserti Meccanica chuyên cung cấp : Bộ giới hạn mô-men xoắn Deserti Meccanica, Phanh điện từ Deserti Meccanica, Ròng rọc Deserti Meccanica, Khớp nối Deserti Meccanica, Vòng đệm Deserti Meccanica, Đĩa ma sát Deserti Meccanica.
Deserti Meccanica cung cấp một loạt các bộ giới hạn momen xoắn cả cơ khí và khí nén để đáp ứng mọi nhu cầu. Luôn chú trọng đến sự phát triển của thị trường và nhu cầu của khách hàng, Deserti Meccanica đã mở rộng dòng sản phẩm bộ giới hạn momen xoắn với một loại sản phẩm mới quan trọng: Năm 2000, công ty một lần nữa tiên phong trên thị trường khi là công ty Ý đầu tiên sản xuất và tiếp thị bộ giới hạn momen xoắn “KHÔNG CÓ ĐỘ RƠ” hướng tâm và xoắn.
Deserti Meccanica Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Deserti Meccanica HGP Viet Nam
LS Series
LASS Series
LASS AIR Series
SGR Series
DM SM PM Series
LINEAR series
MICRO DAMM Series
GS Series
Deserti Backlash Free Torque Limiter SGR Series
Code: SGR-Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
Torque limiters of the “backlash-free” series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload but where it is recommended to maintain a fixed and determined point of transmission.
Deserti Torque Limiter LS Series
Code: LS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
The friction torque limiters allow immediate release from the excess torque applied to the transmission; they do not need resetting and permit a direct visual inspection of operating conditions.
Deserti Torque Limiter Lass Air Series
Code: Lass Air Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The pneumatically operated series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter Lass Series
Code: Lass Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter
Code: DGZ-ZGS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload.
Radial/torsional value=0 during the transmission of motion.
No residual torque after disengagement.
Possibility of combining a switch/proximity to stop the engine.
High sensitivity and maintenance free.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Deserti Meccanica Việt Nam / Hotline : 0938 906 663
ComInTec chuyên cung cấp : Bộ giới hạn momen xoắn ComInTec, Bộ ly hợp khí nén ComInTec, Các khớp nối đàn hồi ComInTec, Các khớp nối đệm ComInTec, Vòng khóa ComInTec, vòng đệm ComInTec, Ròng rọc điều tốc ComInTec, đế trượt động cơ ComInTec. Đại lý ComInTec Việt Nam
Được thành lập ban đầu vào năm 1967 bởi Dante Cavalli, ngày nay ComInTec cung cấp các giải pháp chất lượng cao thông qua thiết kế và sản xuất: các bộ phận truyền động, bộ giới hạn momen xoắn, khớp nối an toàn, bộ giới hạn momen xoắn không khe hở, khớp nối đàn hồi, khớp nối đĩa, khớp nối không khe hở, ròng rọc tốc độ biến đổi, ròng rọc giãn nở, vòng kẹp trục và vòng kẹp.
ComInTec Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
ComInTec HGP Viet Nam
DF
Friction torque limiter
Sliding Safety coupling where the transmission component is fitted between two friction rings and slides when the calibrated torque is reached. The minimum required to have a low cost protection.
EDF/F
Economic ball torque limiter
Safety coupling with simple and compact balls inserted directly in the drive element of transmission. The disengagement occurs quickly and safely if the calibrated torque is exceeded.
DSR
Rollers torque limiter
A Roller safety coupling that allows a complete disengagement when the calibrated torque is reached. Suitable for transmitting high torque with high reliability and small size.
DSS/SG
Backlash free torque limiter
Ball safety coupling with high technology and backlash free transmission. Device with high sensitivity of intervention, instant and precise disconnection.
DSS/SG/RF
Torque limiter free rotation
Backlash free Safety coupling suitable for high speeds, with free rotation and low residual torque after disengagement that occurs in a precisely and immediately. The re-engagement is manual.
DSM
Modular torque limiter
Modular Safety coupling, robust, suitable for “heavy industries” even at high speeds. After disconnection there is free rotation without residual torque, re-engagement is simple and manual.
PR
Torque limiter for gearboxes
Safety coupling to be mounted between the motor and gear unit thus reducing significantly the size of the device at the same power output. Available in both slip that release versions.
DSA
Axial force limiter
Safety coupling with linear limitation of force. The axial disengagement can take place in both compression and tension once the calibrated force is reached, the re-engagement is automatic.
Roller phase pneumatic clutch “DSR/F/AP”
Transmission through rollers with re-engagement in phase 360° (equidistant on request, 30°, 45°, …);
Free rotation for long periods after overload: … / CS;
Suitable for high rotation speeds;
Maintenance free for high reliability;
Arranged to add a microswitch / proximity to stop the motor drive;
Torque range: 5 – 30000 Nm; max. bore ø120 mm.
Friction pneumatic clutch “DSF/TF/AP”
Friction torque transmission;
As tensioner, brake and torque limiter;
Constant adjustment of the calibration torque;
Available with special friction rings for specific requirements;
Available in version …/SI to stop the transmission after an overload;
Torque range: 3 – 875 Nm; max. bore ø 65 mm.
Electromechanical switch “EM”
Die-cast aluminium box;
Protection level IP57 DIN 40050;
Possibility of 1 contact (EM1) or 2 contacts (EM2) available;
Adjustment of the lever end position possible;
Operation temperature range from -10°C to +85°C;
Three different options of voltage input: 1,5A – 250 VCA; 5A-24 VCC; 0,2A-250 VdC;
Initial stroke 0,7 mm, Extra stroke: 4 ÷ 8 mm depending on setting (possible in a range of 6 mm).
GTR
Torsionally rigid disc coupling with angular backlash free transfer of motion. Transmission and maximum flexibility in operation. Available with personalized spacer.
GRI
Rigid coupling in steel, suitable for shaft connections with good alignment. Available in one or two sections.
GSF
Bellow coupling in aluminium with high torsional rigidity. Backlash free, low inertia and high reliability.
GAS
Elastomeric jaw coupling, good vibration dampening properties. Available with different types of elastomeric element.
GEC
Compact elastic coupling protected from environmental conditions. Fast maintenance possible without the need to move the shafts.
GD
Gear coupling without wear due to the polyamide sleeve, suitable for high axial misalignments.
GC
Chain coupling, simple, economic and easy to assemble. Suitable for dry and dusty environments.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
ComInTec Việt Nam / Hotline : 0938 906 663
ComInTec chuyên cung cấp : Bộ giới hạn momen xoắn ComInTec, Bộ ly hợp khí nén ComInTec, Các khớp nối đàn hồi ComInTec, Các khớp nối đệm ComInTec, Vòng khóa ComInTec, vòng đệm ComInTec, Ròng rọc điều tốc ComInTec, đế trượt động cơ ComInTec.
Được thành lập ban đầu vào năm 1967 bởi Dante Cavalli, ngày nay ComInTec cung cấp các giải pháp chất lượng cao thông qua thiết kế và sản xuất: các bộ phận truyền động, bộ giới hạn momen xoắn, khớp nối an toàn, bộ giới hạn momen xoắn không khe hở, khớp nối đàn hồi, khớp nối đĩa, khớp nối không khe hở, ròng rọc tốc độ biến đổi, ròng rọc giãn nở, vòng kẹp trục và vòng kẹp.
ComInTec Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
ComInTec HGP Viet Nam
DF
Friction torque limiter
Sliding Safety coupling where the transmission component is fitted between two friction rings and slides when the calibrated torque is reached. The minimum required to have a low cost protection.
EDF/F
Economic ball torque limiter
Safety coupling with simple and compact balls inserted directly in the drive element of transmission. The disengagement occurs quickly and safely if the calibrated torque is exceeded.
DSR
Rollers torque limiter
A Roller safety coupling that allows a complete disengagement when the calibrated torque is reached. Suitable for transmitting high torque with high reliability and small size.
DSS/SG
Backlash free torque limiter
Ball safety coupling with high technology and backlash free transmission. Device with high sensitivity of intervention, instant and precise disconnection.
DSS/SG/RF
Torque limiter free rotation
Backlash free Safety coupling suitable for high speeds, with free rotation and low residual torque after disengagement that occurs in a precisely and immediately. The re-engagement is manual.
DSM
Modular torque limiter
Modular Safety coupling, robust, suitable for “heavy industries” even at high speeds. After disconnection there is free rotation without residual torque, re-engagement is simple and manual.
PR
Torque limiter for gearboxes
Safety coupling to be mounted between the motor and gear unit thus reducing significantly the size of the device at the same power output. Available in both slip that release versions.
DSA
Axial force limiter
Safety coupling with linear limitation of force. The axial disengagement can take place in both compression and tension once the calibrated force is reached, the re-engagement is automatic.
Roller phase pneumatic clutch “DSR/F/AP”
Transmission through rollers with re-engagement in phase 360° (equidistant on request, 30°, 45°, …);
Free rotation for long periods after overload: … / CS;
Suitable for high rotation speeds;
Maintenance free for high reliability;
Arranged to add a microswitch / proximity to stop the motor drive;
Torque range: 5 – 30000 Nm; max. bore ø120 mm.
Friction pneumatic clutch “DSF/TF/AP”
Friction torque transmission;
As tensioner, brake and torque limiter;
Constant adjustment of the calibration torque;
Available with special friction rings for specific requirements;
Available in version …/SI to stop the transmission after an overload;
Torque range: 3 – 875 Nm; max. bore ø 65 mm.
Electromechanical switch “EM”
Die-cast aluminium box;
Protection level IP57 DIN 40050;
Possibility of 1 contact (EM1) or 2 contacts (EM2) available;
Adjustment of the lever end position possible;
Operation temperature range from -10°C to +85°C;
Three different options of voltage input: 1,5A – 250 VCA; 5A-24 VCC; 0,2A-250 VdC;
Initial stroke 0,7 mm, Extra stroke: 4 ÷ 8 mm depending on setting (possible in a range of 6 mm).
GTR
Torsionally rigid disc coupling with angular backlash free transfer of motion. Transmission and maximum flexibility in operation. Available with personalized spacer.
GRI
Rigid coupling in steel, suitable for shaft connections with good alignment. Available in one or two sections.
GSF
Bellow coupling in aluminium with high torsional rigidity. Backlash free, low inertia and high reliability.
GAS
Elastomeric jaw coupling, good vibration dampening properties. Available with different types of elastomeric element.
GEC
Compact elastic coupling protected from environmental conditions. Fast maintenance possible without the need to move the shafts.
GD
Gear coupling without wear due to the polyamide sleeve, suitable for high axial misalignments.
GC
Chain coupling, simple, economic and easy to assemble. Suitable for dry and dusty environments.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
ComInTec Việt Nam / Hotline : 0938 906 663
You cannot copy content of this page
