Showing 1–18 of 1105 results
Flowserve chuyên cung cấp : Bơm màng Flowserve, Bơm piston khí Flowserve, Bơm tay định lượng Flowserve, Van bi Flowserve, Van bướm Flowserve, Van điều khiển Flowserve, Van cổng Flowserve, Van cầu Flowserve, Van một chiều Flowserve. Đại lý Flowserve Việt Nam
Flowserve là công ty hàng đầu thế giới về sản xuất và dịch vụ hậu mãi cho các hệ thống điều khiển dòng chảy toàn diện. Chuyên môn của chúng tôi cho phép chúng tôi hỗ trợ các ứng dụng toàn cầu của bạn, bao gồm sản xuất năng lượng, nước và thực phẩm, cũng như các cơ sở hạ tầng quan trọng khác.
Flowserve Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Flowserve HGP Viet Nam
MOGAS Power Operated Relief Valve (PORV)
ASME 1500/2500/4500
MOGAS RSVP-UK Valve
ASME 600 / 900/ 1500 Limited Class: Small in Size – Large in Performance
y-pattern, y pattern
MOGAS Max Series
MOGAS C-Series Customizable Isolation Valve
The C-Series valve is the best choice in large bore isolation applications. MOGAS engineers have successfully designed the C-Series valve line which
iRSVP_600_900_1500_118233_isometric_2.psd
MOGAS iRSVP Isolation Valve
ASME 600 – 4500 Limited Class: Setting the Standard
Floating Ball Valves – FK75C
The FK75C split-body, full-bore, floating ball valve represents the highest standards in valve technology.
Trunnion Mounted Ball Valves – FK76C Đại lý Flowserve Việt Nam
The FK76C split-body, full-bore, trunnion-mounted ball valve represents the highest standards in valve technology.
Linear Globe/Angle Control Valves – FlowTop GS
The Valtek FlowTop GS control valve (types V746 and V748) improves the reliability and uptime of production processes while minimizing
Linear Globe – Compressor Anti-Surge Valve
Valtek® Mark 100SC Linear Globe – Compressor Anti-Surge Valve
The Valtek® Compressor Anti-Surge Valve from Flowserve represents a revolutionary solution to anti-surge control by combining precise
Lined Butterfly Valves – Slimseal
The Slimseal Lined Butterfly Valve is a high-performance, “fit and forget”, wafer-type valve with integrally molded body liner designed
Eccentric Plug – MaxFlo 4
The Valtek MaxFlo 4 eccentric rotary plug control valve is for applications demanding higher rangeability, precise control and higher
Segmented Ball Valves – ShearStream HP
Cavitation Solution Control Valves – CavControl
Cavitation Solution Control Valves – ChannelStream Đại lý Flowserve Việt Nam
Cavitation Solution Control Valves – DiamondBack
Erosion Resistant Control Valves – Survivor
Gate Valves – Flexible Split Wedge Gate Valves – Equiwedge Main Steam Isolation Valve
Flexible Split Wedge Gate Valves – Equiwedge Main Steam Isolation Valve
Gate Valves – Flexible Split Wedge Gate Valves – Equiwedge Main Feedwater Isolation Valve
Flexible Split Wedge Gate Valves – Equiwedge Main Feedwater Isolation Valve
Compliant with ASME Section III and RCC-M design codes, Edward Equiwedge flexible split wedge gate valve is the industry standard for
Gate Valves – Flexible Split Wedge Gate Valves – Equiwedge
Flexible Split Wedge Gate Valves – Equiwedge
Gate Valves – Flexible Wedge Gate Valves – Flex Wedge
Flexible Wedge Gate Valves – Flex Wedge
Gate Valves – Slab Gate Valves – Valbart TCSGV Through Conduit Slab Gate Valve
Slab Gate Valves – Valbart TCSGV Through Conduit Slab Gate Valve
Y-Pattern Globe Valves – Flite-Flow Main Steam Isolation Valve
Lubricated Plug Valves – Screwed Gland Type Iron
Lubricated Plug Valves – Taper
Lubricated Plug Valves – Super-H Đại lý Flowserve Việt Nam
Lubricated Plug Valves – Super-H
Lubricated Plug Valves – Multiport Series (Steel and Iron)
Floating Ball Valves – McCANNA Cryogenic Ball Valve
Linear Globe/Angle Control Valves – Mark One™ Three-Way
Linear Globe/Angle Control Valves – Mark One-X
Linear Globe/Angle Control Valves – Mark Two™
Linear Globe/Angle Control Valves – Mark Eight™
Linear Globe/Angle Control Valves – Mark Eight™
Floating Ball Valves – FK79
Trunnion Mounted Ball Valves – HK35
Trunnion Mounted Ball Valves – VW1
Trunnion Mounted Ball Valves – VB2 & VB3
Trunnion Mounted Ball Valves – Subsea
Trunnion Mounted Ball Valves – Double Block and Bleed
Trunnion Mounted Ball Valves – Valbart Cryogenic Ball Valve
Rising Stem Ball Valve – RSBV
Lined Ball Valves – AKH2.2
The AKH2.2 Lined Full Port Ball Valve is a two-piece lined ball valve
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Flowserve Việt Nam / Hotline : 0938 906 663
Flowserve chuyên cung cấp : Bơm màng Flowserve, Bơm piston khí Flowserve, Bơm tay định lượng Flowserve, Van bi Flowserve, Van bướm Flowserve, Van điều khiển Flowserve, Van cổng Flowserve, Van cầu Flowserve, Van một chiều Flowserve. Đại lý Flowserve Việt Nam
Flowserve là công ty hàng đầu thế giới về sản xuất và dịch vụ hậu mãi cho các hệ thống điều khiển dòng chảy toàn diện. Chuyên môn của chúng tôi cho phép chúng tôi hỗ trợ các ứng dụng toàn cầu của bạn, bao gồm sản xuất năng lượng, nước và thực phẩm, cũng như các cơ sở hạ tầng quan trọng khác.
Flowserve Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Flowserve HGP Viet Nam
MOGAS Power Operated Relief Valve (PORV)
ASME 1500/2500/4500
MOGAS RSVP-UK Valve
ASME 600 / 900/ 1500 Limited Class: Small in Size – Large in Performance
y-pattern, y pattern
MOGAS Max Series
MOGAS C-Series Customizable Isolation Valve
The C-Series valve is the best choice in large bore isolation applications. MOGAS engineers have successfully designed the C-Series valve line which
iRSVP_600_900_1500_118233_isometric_2.psd
MOGAS iRSVP Isolation Valve
ASME 600 – 4500 Limited Class: Setting the Standard
Floating Ball Valves – FK75C
The FK75C split-body, full-bore, floating ball valve represents the highest standards in valve technology.
Trunnion Mounted Ball Valves – FK76C Đại lý Flowserve Việt Nam
The FK76C split-body, full-bore, trunnion-mounted ball valve represents the highest standards in valve technology.
Linear Globe/Angle Control Valves – FlowTop GS
The Valtek FlowTop GS control valve (types V746 and V748) improves the reliability and uptime of production processes while minimizing
Linear Globe – Compressor Anti-Surge Valve
Valtek® Mark 100SC Linear Globe – Compressor Anti-Surge Valve
The Valtek® Compressor Anti-Surge Valve from Flowserve represents a revolutionary solution to anti-surge control by combining precise
Lined Butterfly Valves – Slimseal
The Slimseal Lined Butterfly Valve is a high-performance, “fit and forget”, wafer-type valve with integrally molded body liner designed
Eccentric Plug – MaxFlo 4
The Valtek MaxFlo 4 eccentric rotary plug control valve is for applications demanding higher rangeability, precise control and higher
Segmented Ball Valves – ShearStream HP
Cavitation Solution Control Valves – CavControl
Cavitation Solution Control Valves – ChannelStream Đại lý Flowserve Việt Nam
Cavitation Solution Control Valves – DiamondBack
Erosion Resistant Control Valves – Survivor
Gate Valves – Flexible Split Wedge Gate Valves – Equiwedge Main Steam Isolation Valve
Flexible Split Wedge Gate Valves – Equiwedge Main Steam Isolation Valve
Gate Valves – Flexible Split Wedge Gate Valves – Equiwedge Main Feedwater Isolation Valve
Flexible Split Wedge Gate Valves – Equiwedge Main Feedwater Isolation Valve
Compliant with ASME Section III and RCC-M design codes, Edward Equiwedge flexible split wedge gate valve is the industry standard for
Gate Valves – Flexible Split Wedge Gate Valves – Equiwedge
Flexible Split Wedge Gate Valves – Equiwedge
Gate Valves – Flexible Wedge Gate Valves – Flex Wedge
Flexible Wedge Gate Valves – Flex Wedge
Gate Valves – Slab Gate Valves – Valbart TCSGV Through Conduit Slab Gate Valve
Slab Gate Valves – Valbart TCSGV Through Conduit Slab Gate Valve
Y-Pattern Globe Valves – Flite-Flow Main Steam Isolation Valve
Lubricated Plug Valves – Screwed Gland Type Iron
Lubricated Plug Valves – Taper
Lubricated Plug Valves – Super-H Đại lý Flowserve Việt Nam
Lubricated Plug Valves – Super-H
Lubricated Plug Valves – Multiport Series (Steel and Iron)
Floating Ball Valves – McCANNA Cryogenic Ball Valve
Linear Globe/Angle Control Valves – Mark One™ Three-Way
Linear Globe/Angle Control Valves – Mark One-X
Linear Globe/Angle Control Valves – Mark Two™
Linear Globe/Angle Control Valves – Mark Eight™
Linear Globe/Angle Control Valves – Mark Eight™
Floating Ball Valves – FK79
Trunnion Mounted Ball Valves – HK35
Trunnion Mounted Ball Valves – VW1
Trunnion Mounted Ball Valves – VB2 & VB3
Trunnion Mounted Ball Valves – Subsea
Trunnion Mounted Ball Valves – Double Block and Bleed
Trunnion Mounted Ball Valves – Valbart Cryogenic Ball Valve
Rising Stem Ball Valve – RSBV
Lined Ball Valves – AKH2.2
The AKH2.2 Lined Full Port Ball Valve is a two-piece lined ball valve
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Flowserve Việt Nam / Hotline : 0938 906 663
Pavone Systems chuyên cung cấp : Cảm biến tải trọng Pavone Systems, Bộ truyền tín hiệu trọng lượng Pavone Systems, Bộ hiển thị trọng lượng Pavone Systems, Cân sàn Pavone Systems. Đại lý Pavone Systems Việt Nam
Pavone Systems đã dẫn đầu trong lĩnh vực cân đo trong 60 năm. Từ khi thành lập công ty đến nay, chúng tôi đã trải qua tất cả các giai đoạn phát triển công nghệ, từ các giải pháp cân điện tử tích hợp, đặc biệt chú trọng đến việc phát triển các cảm biến tải, bộ truyền tín hiệu trọng lượng và bộ hiển thị trọng lượng.
Pavone Systems Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Pavone Systems HGP Viet Nam
PS24
The compression load cell PS24 is made of stainless steel and hermetically sealed. The compression load cell PS24 is easy to install and may be used in several weighing systems, such as tank and silage…
Load Cells Compression Load Cells
1000
The compression load cell 1000 is precise and robust and it has been designed to meet the requirements of a wide range of industrial weighing applications: hoppers, tanks, platforms. The load cell 1000…
EAC Đại lý Pavone Systems Việt Nam
Load Cells Compression Load Cells
2000
The compression load cell 2000 is made of stainless steel and it has excellent characteristics of precision and robustness. Equipped with watertight protection, the 2000 load cell is resistant to the…
Load Cells S-Type Load Cells Pavone Systems Việt Nam
60001
The tension load cell 60001 has been designed for the industrial weighing of small tanks and hoppers. The S-type load cell 60001 has excellent linearity and accuracy features and excellent overload resistance…
Product
Load Cells S-Type Load Cells
60050
The tension and compression load cell 60050 (also known as traction or S-type load cell) has been designed for the industrial fiscal weighing of small tanks and hoppers. The traction load cell 60050 has… Đại lý Pavone Systems Việt Nam
PSTR
The PSTR tension load cell is made of stainless steel and is ideal for tensile loads and suspended loads, for measuring tensile forces, for dynamometric measurements and as a load limiting device for…
Load Cells Shear Beam Load Cells
65023
The 65023 shear beam load cell, made of nickel-plated steel and stainless steel, has watertight protection for use in harsh environmental conditions, excellent linearity and precision characteristics…
Load Cells Shear Beam Load Cells
65083
The 65083 shear beam load cell has been designed for the weighing of hoppers and tanks and for the construction of low profile platforms, it has excellent characteristics of linearity, precision and resistance…
Load Cells Shear Beam Load Cells
PSD800
The PSD800 shear beam load cell, made of stainless steel and hermetically sealed, is suitable for platforms, hoppers and pallets. The PSD800 shear beam load cell guarantees high precision up to 6000 divisions…
Load Cells Double Shear Beam Load Cells
DDR
The DDR double shear beam load cell made of stainless steel and with fully welded hermetic seal, is suitable for weighing tanks and silos and has a 12 m shielded 6-conductor cable for electrical connection.…
Load Cells Double Shear Beam Load Cells
DSBZ
The double shear beam load cell DSBZ guarantees high precision and is insensitive to lateral loads. For this reason, it is suitable for heavy industrial weighing, such as trucks and large heavy vehicles.…
Load Cells Double Shear Beam Load Cells
PRR
The PRR double shear beam load cell, made of stainless steel with watertight protection, has a low profile and is perfect for working in hostile environments and heavy industries, such as the steel industry.…
Load Cells Off Center Load Cells Đại lý Pavone Systems Việt Nam
1320
The off center load cell 1320, made of aluminum, is ideal for large-scale single-cell platforms, dynamometers and weight controllers. This load cell maintains precision in any position the object is loaded…
Load Cells Off Center Load Cells
C2D1
The off center load cell C2D1 can be used in different sectors as it maintains precision even where the loads are not well centered and static, it is characterized by high accuracy and low pressure. The…
Load Cells Off Center Load Cells
C2G1
The Off Center C2G1 load cell is capable of weighing while maintaining high precision and maximum reliability even with off-center loads and is particularly suitable for the construction of industrial…
Load Cells Bending Beam Load Cells
ALPHA
The bending beam load cell ALPHA has excellent precision in small dimensions, is easy to install, has a high temperature range of use and is equipped with a shielded 4-conductor cable 1.5 meters long…
Load Cells Bending Beam Load Cells
BBF
The bending beam load cell BBF is welded and built in stainless steel, has a thermal seal and has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems, suspended loads and…
BBR
The bending beam load cell BBR is made of stainless steel, is completely welded and has a thermal seal. The cell BBR has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems,…
Load Cells Pin Load Cells
GIPE3000
The GIPE3000 pin load cell, made of stainless steel, is ideal where it is necessary to measure the lifting force. The pin load cells are usually mounted as pulley pins or inserted as integral parts of…
Load Cells Pin Load Cells
PSPRX
The PSPRX pin load cell is made of stainless steel and offers maximum resistance to impacts and overloads. The operation of the PSPRX load cell is double-ended shear beam. The PSPRX cell is insensitive…
Load Cells High Temperature Load Cells
C2G1 HT
The C2G1 HT load cell is suitable for high temperatures and it is particularly suitable
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Pavone Systems Việt Nam / Hotline : 0938 906 663
Pavone Systems chuyên cung cấp : Cảm biến tải trọng Pavone Systems, Bộ truyền tín hiệu trọng lượng Pavone Systems, Bộ hiển thị trọng lượng Pavone Systems, Cân sàn Pavone Systems. Đại lý Pavone Systems Việt Nam
Pavone Systems đã dẫn đầu trong lĩnh vực cân đo trong 60 năm. Từ khi thành lập công ty đến nay, chúng tôi đã trải qua tất cả các giai đoạn phát triển công nghệ, từ các giải pháp cân điện tử tích hợp, đặc biệt chú trọng đến việc phát triển các cảm biến tải, bộ truyền tín hiệu trọng lượng và bộ hiển thị trọng lượng.
Pavone Systems Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Pavone Systems HGP Viet Nam
PS24
The compression load cell PS24 is made of stainless steel and hermetically sealed. The compression load cell PS24 is easy to install and may be used in several weighing systems, such as tank and silage…
Load Cells Compression Load Cells
1000
The compression load cell 1000 is precise and robust and it has been designed to meet the requirements of a wide range of industrial weighing applications: hoppers, tanks, platforms. The load cell 1000…
EAC Đại lý Pavone Systems Việt Nam
Load Cells Compression Load Cells
2000
The compression load cell 2000 is made of stainless steel and it has excellent characteristics of precision and robustness. Equipped with watertight protection, the 2000 load cell is resistant to the…
Load Cells S-Type Load Cells
60001
The tension load cell 60001 has been designed for the industrial weighing of small tanks and hoppers. The S-type load cell 60001 has excellent linearity and accuracy features and excellent overload resistance…
Product
Load Cells S-Type Load Cells
60050
The tension and compression load cell 60050 (also known as traction or S-type load cell) has been designed for the industrial fiscal weighing of small tanks and hoppers. The traction load cell 60050 has… Đại lý Pavone Systems Việt Nam
PSTR
The PSTR tension load cell is made of stainless steel and is ideal for tensile loads and suspended loads, for measuring tensile forces, for dynamometric measurements and as a load limiting device for…
Load Cells Shear Beam Load Cells
65023
The 65023 shear beam load cell, made of nickel-plated steel and stainless steel, has watertight protection for use in harsh environmental conditions, excellent linearity and precision characteristics…
Load Cells Shear Beam Load Cells
65083
The 65083 shear beam load cell has been designed for the weighing of hoppers and tanks and for the construction of low profile platforms, it has excellent characteristics of linearity, precision and resistance…
Load Cells Shear Beam Load Cells
PSD800
The PSD800 shear beam load cell, made of stainless steel and hermetically sealed, is suitable for platforms, hoppers and pallets. The PSD800 shear beam load cell guarantees high precision up to 6000 divisions…
Load Cells Double Shear Beam Load Cells
DDR
The DDR double shear beam load cell made of stainless steel and with fully welded hermetic seal, is suitable for weighing tanks and silos and has a 12 m shielded 6-conductor cable for electrical connection.…
Load Cells Double Shear Beam Load Cells
DSBZ
The double shear beam load cell DSBZ guarantees high precision and is insensitive to lateral loads. For this reason, it is suitable for heavy industrial weighing, such as trucks and large heavy vehicles.…
Load Cells Double Shear Beam Load Cells
PRR
The PRR double shear beam load cell, made of stainless steel with watertight protection, has a low profile and is perfect for working in hostile environments and heavy industries, such as the steel industry.…
Load Cells Off Center Load Cells Đại lý Pavone Systems Việt Nam
1320
The off center load cell 1320, made of aluminum, is ideal for large-scale single-cell platforms, dynamometers and weight controllers. This load cell maintains precision in any position the object is loaded…
Load Cells Off Center Load Cells
C2D1
The off center load cell C2D1 can be used in different sectors as it maintains precision even where the loads are not well centered and static, it is characterized by high accuracy and low pressure. The…
Load Cells Off Center Load Cells
C2G1
The Off Center C2G1 load cell is capable of weighing while maintaining high precision and maximum reliability even with off-center loads and is particularly suitable for the construction of industrial…
Load Cells Bending Beam Load Cells
ALPHA
The bending beam load cell ALPHA has excellent precision in small dimensions, is easy to install, has a high temperature range of use and is equipped with a shielded 4-conductor cable 1.5 meters long…
Load Cells Bending Beam Load Cells
BBF
The bending beam load cell BBF is welded and built in stainless steel, has a thermal seal and has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems, suspended loads and…
BBR
The bending beam load cell BBR is made of stainless steel, is completely welded and has a thermal seal. The cell BBR has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems,…
Load Cells Pin Load Cells
GIPE3000
The GIPE3000 pin load cell, made of stainless steel, is ideal where it is necessary to measure the lifting force. The pin load cells are usually mounted as pulley pins or inserted as integral parts of…
Load Cells Pin Load Cells
PSPRX
The PSPRX pin load cell is made of stainless steel and offers maximum resistance to impacts and overloads. The operation of the PSPRX load cell is double-ended shear beam. The PSPRX cell is insensitive…
Load Cells High Temperature Load Cells
C2G1 HT
The C2G1 HT load cell is suitable for high temperatures and it is particularly suitable
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Pavone Systems Việt Nam / Hotline : 0938 906 663
EUBA chuyên cung cấp : Bộ truyền động tuyến tính EUBA, Bộ truyền động tải nặng EUBA, Bộ truyền động đặc biệt EUBA , Xi lanh EUBA, Xi lanh khí nén EUBA. Đại lý EUBA Việt Nam
EUBA – cái tên này gắn liền với gần 60 năm kinh nghiệm trong phát triển các bộ truyền động cơ điện.
Giải pháp tùy chỉnh là thế mạnh của chúng tôi. Chúng tôi cung cấp các bộ truyền động với lực từ 0,5 kN đến 2.000 kN.
EUBA Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
EUBA HGP Viet Nam
Lifting cylinder A4
The EUBA lifting cylinder A4 is an electro-mechanical drive with trapezoidal threaded spindle. The spindle is protected against external influences by a hard chromium plated steel tube and internally secured against rotation. The mechanical connection to the existing system is realized by means of a trunnion and clevis with pin or swivel head with bearing. The flange-mounted motor is a DIN IEC standard- or geared motor. The overload-, position indicator- and motor connections are located in external, easily accessible terminal boxes.
Lifting cylinder B4
The EUBA lifting cylinder B4 is an electro-mechanical actuator with trapezoidal threaded spindle. Also in this model the spindle is protected against external influences by a hard chromium plated steel tube and internally secured against rotation. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67. For all configurations please contact us. We will gladly advise you on any questions that may occur.
Lifting cylinder C4
The EUBA lifting cylinder C4 is an electro-mechanical actuator with trapezoidal threaded spindle. It is used, for example, in steel mills, power plants, cement works or in hydro engineering. As with all our lifting cylinders, the spindle of the EUBA C4 is protected against external influences by a hard chromium plated steel tube. Internally, the product is secured against rotation. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67.
Lifting cylinder D4
EUBA lifting cylinder D4 is an electro-mechanical actuator with trapezoidal threaded spindle. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67. The steel tube, which protects the spindle against external influences, has a hard chrome plating against rust. Thrust tube and trunnion can be made in -VA (1.4301). For further configuration possibilities, please refer to the technical data or contact us.
EUBA heavy-duty cylinders are designed for maximum forces in industrial applications. Due to their optimized performance they are able to replace hydraulic cylinders and convince by their high force density.
EUBA heavy-duty cylinders are designed for maximum forces in industrial applications. Due to their optimized performance they are able to replace hydraulic cylinders and convince by their high force density.
EUBA’s strong development team is able to flexibly implement application-specific actuator solutions. Our customers trust in the high quality of EUBA special actuators across all industries.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
EUBA Việt Nam / Hotline : 0938 906 663
EUBA chuyên cung cấp : Bộ truyền động tuyến tính EUBA, Bộ truyền động tải nặng EUBA, Bộ truyền động đặc biệt EUBA , Xi lanh EUBA, Xi lanh khí nén EUBA. Đại lý EUBA Việt Nam
EUBA – cái tên này gắn liền với gần 60 năm kinh nghiệm trong phát triển các bộ truyền động cơ điện.
Giải pháp tùy chỉnh là thế mạnh của chúng tôi. Chúng tôi cung cấp các bộ truyền động với lực từ 0,5 kN đến 2.000 kN.
EUBA Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
EUBA HGP Viet Nam
Lifting cylinder A4
The EUBA lifting cylinder A4 is an electro-mechanical drive with trapezoidal threaded spindle. The spindle is protected against external influences by a hard chromium plated steel tube and internally secured against rotation. The mechanical connection to the existing system is realized by means of a trunnion and clevis with pin or swivel head with bearing. The flange-mounted motor is a DIN IEC standard- or geared motor. The overload-, position indicator- and motor connections are located in external, easily accessible terminal boxes.
Lifting cylinder B4
The EUBA lifting cylinder B4 is an electro-mechanical actuator with trapezoidal threaded spindle. Also in this model the spindle is protected against external influences by a hard chromium plated steel tube and internally secured against rotation. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67. For all configurations please contact us. We will gladly advise you on any questions that may occur.
Lifting cylinder C4
The EUBA lifting cylinder C4 is an electro-mechanical actuator with trapezoidal threaded spindle. It is used, for example, in steel mills, power plants, cement works or in hydro engineering. As with all our lifting cylinders, the spindle of the EUBA C4 is protected against external influences by a hard chromium plated steel tube. Internally, the product is secured against rotation. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67.
Lifting cylinder D4
EUBA lifting cylinder D4 is an electro-mechanical actuator with trapezoidal threaded spindle. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67. The steel tube, which protects the spindle against external influences, has a hard chrome plating against rust. Thrust tube and trunnion can be made in -VA (1.4301). For further configuration possibilities, please refer to the technical data or contact us.
EUBA heavy-duty cylinders are designed for maximum forces in industrial applications. Due to their optimized performance they are able to replace hydraulic cylinders and convince by their high force density.
EUBA heavy-duty cylinders are designed for maximum forces in industrial applications. Due to their optimized performance they are able to replace hydraulic cylinders and convince by their high force density.
EUBA’s strong development team is able to flexibly implement application-specific actuator solutions. Our customers trust in the high quality of EUBA special actuators across all industries.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
EUBA Việt Nam / Hotline : 0938 906 663
Steimel chuyên cung cấp : Máy xếp pallet Steimel, Máy bơm Steimel, Máy bơm ly tâm Steimel, Máy bơm cánh quạt quay Steimel, Máy bơm bánh răng Steimel, Máy ly tâm Steimel, Máy ly tâm theo mẻ Steimel, Máy ly tâm liên tục Steimel, Máy nghiền phế liệu Steimel. Đại lý Steimel Việt Nam
Từ năm 1878, cái tên Steimel đã đại diện cho công nghệ tiên tiến “sản xuất tại Đức”. Trải qua nhiều thế hệ, từ một nhà sản xuất máy móc nông nghiệp, công ty đã phát triển thành một tập đoàn công nghiệp hoạt động quốc tế, tập trung vào công nghệ ly tâm và bơm.
Steimel Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Steimel HGP Viet Nam
P/N: BZP053032RD–165R, Type: SF3/32RD-O
BMS 2-36 RD (Art.No.BZP042V36RD-0001R)
PZZ-000292979
PKB100IIPL000895/KB 100-IIPL-DN40
SF 3/32 RD-O
PSF4-63RD-180435R
ASF2-20RD-170426R Đại lý Steimel Việt Nam
SF 3/50 RD-VLFM
Gear pump unit complete. with 4 kW motor, four-pole, 230/400 V, 50 Hz, IE3, assembled with lantern, base and coupling. Housing material: cast iron. Pinion shafts: 1.7139 helical gearing. Shaft seal: radial shaft seal. Elastomers: FKM. Bearings: plain bearings. Connections: SAE 1 1/2″. with pressure relief valve set to 8 bar
SF 2/13RD
HYDRAULIC BOMB LUBRICATION SF 2/13 RD ST HYDRAULIC BOMB LUBRICATION SF 2/13 RD STEIMEL TYPE LUBRICATION REFERENCE BZ52013RD-051 MANUFACTURING STEIMEL (KABELSCHLEPP) MODEL SF 2/13 RD SERIES 972413 FLOWING LUBE OIL VAZÃO 16 L/MIN (APPROXIMATE) PRESSURE OF WORK 5 BAR PRESSURE MINIMUM 2 BAR PRESSURE MAXIMUM 20 BAR VISCOSITY 50-5000 CST NOMINAL ROTATION 1720 RPM SENSE OF ROTATION HOURLY SENSE MATERIAL CG-25 (CARCASS) NBR (ELASTÔMERO) CONSTRUCTION CARCASS HARDENED STEEL 16MNCRS5, POLISHED FLANGE AND HELICAL TEETH, ROLAMENT MULTILAYER MD, RADIAL AXIS – RING OF IT SEALS CONNECTION OF SUCTION G1 / SAE1 CONNECTION OF PRESSURE G1 / SAE1 CERTIFICATE TEST OF OPERATION DRAWING OF THE MAKER DMB052D-03 (YOU GIVE. DIMENSIONAL) I DRAW DET052013RD-0050 (IT LISTS PIECES APPLICATION TRANSPORTS FAST 1 AND 2 – L.A OBSERVATION TYPE OF THE PLATE ETY924-D/E-XC02
SF 2/13RD-VLFM
Pump type SF 2/13RD-VLFM gear pump in block design complete with motor 1.1 kW, Four-pole, 230/400 V, 50 Hz, IP 55, IE3, with coupling, base, and lantern
SF 3/50 R
Pump type SF 3/50 R horizontal gear pump with free shaft end. Housing material: GG-25. Pinion shafts: 1.7139, helical, nitrided. Shaft seal: radial shaft seal. Elastomers: FKM. Connections: SAE 1 1/2″. Rotation direction: clockwise
SF 2/5 RD
Starting oil pump, clockwise rotation, without motor Đại lý Steimel Việt Nam
SF 4/112RD
GEAR PUMP SF4/112 RD WITH FREE SHAFT END. MANUFACTURER: STEIMEL. 150 L/MI. STARTING TEMP. > 10 DEG. CENTW/PRESSURE. LIMITING VALVE SET TOP > 8 BAR (WITHOUT MOTOR) FOR RM 3 & CM 3 GEARBOX LUBRICATION
063502-1
Pump type SF 3/40 R Steimel gear pump with free shaft end. Housing material: Cast iron. Pinion shaft: 1.7225. Noise-optimized gearing. Mechanical seal: RWD. Plain bearing: Multi-layer MD. Rotation direction: Right. Connections: 1 1/2″ SAE
1.PU16-1128-2
TFE10-240PDG
Repair kit for bitumen pumps Đại lý Steimel Việt Nam
ASF3-32RD-172168R
Geared motor ASF3-32RD-172168R. Gear pump unit: SF 3/32 RD – VLFM. Article no.: ASF3-32RD-172168R. Dimension sheet: DPA053D-172168R. Spare parts list: DET053032RD – 165R. Suction u. Pressure connection: SAE 1 ½ Housing parts: EN-GJL-250 (GG-25) Pinion shafts, noise optimized. : 16MnCrS5, egh., Oblique. Shaft seal: Radial shaft seal Elastomers: FKM Storage: MD multilayer Fluid: Lubricating oil Viscosity: 50-5000 cSt. temperature: 10-60°C Flow rate: approx. 49 / 59.2 l / min Pressure: 5 bar Speed: 1450/1750 1 / min Pressure relief valve Opening pressure: 12 bar Adjustment range: 2-18 bar Direction of rotation: right Test run: yes, with HLPD 46 Bellhousing: BLF053250128LA21 Clutch: BKUA055-1928-301 Three-phase standard motor: LDM100-04-904 (birch bark) engine data: Power 1/2: 3.0 / 3.4 kW Speed 1/2: 1500/1800 1 / min Voltage / Frequency 1: 230/400 volts at 50 Hz Voltage / Frequency 2: 265/460 volts at 60 Hz Efficiency class: IE3 Additional label without CE and IE3 marking: Voltage / Frequency: 220-240 / 380-420 volts at 50/60 Hz Voltage / Frequency: 250-280 / 440-480 volts at 60 Hz Protection class: IP 55 Insulation class: F Design: B 5 Aggregate paint: primed Nameplate: ETY924-D / E – PE02
SF2-13RD.-VLFM Đại lý Steimel Việt Nam
Motor TYR: SF2-13RD.-VLFM F-NR: 000.001.153.800 A-NR: 04.1800-1
5AP112M4-7AA
Electric motor 4 kW, 4-pole, 400/690 V, 50 Hz, IE3, flange B5 Origin:
CH4
Door seal for dryer centrifuge, 10 meters Đại lý Steimel Việt Nam
for type TM10-240PDDM-GKM
The ring for the pump/N 1.PU112648 type TM 1240 PDDM drive shaft with gear
for type TE3-80PDD-GKGM
Drive pinion suitable for type TE3-80PDD-GKGM, corresponding serial number: 1.PU11 2648-1
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Steimel Việt Nam / Hotline : 0938 906 663
Steimel chuyên cung cấp : Máy xếp pallet Steimel, Máy bơm Steimel, Máy bơm ly tâm Steimel, Máy bơm cánh quạt quay Steimel, Máy bơm bánh răng Steimel, Máy ly tâm Steimel, Máy ly tâm theo mẻ Steimel, Máy ly tâm liên tục Steimel, Máy nghiền phế liệu Steimel. Đại lý Steimel Việt Nam
Từ năm 1878, cái tên Steimel đã đại diện cho công nghệ tiên tiến “sản xuất tại Đức”. Trải qua nhiều thế hệ, từ một nhà sản xuất máy móc nông nghiệp, công ty đã phát triển thành một tập đoàn công nghiệp hoạt động quốc tế, tập trung vào công nghệ ly tâm và bơm.
Steimel Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Steimel HGP Viet Nam
P/N: BZP053032RD–165R, Type: SF3/32RD-O
BMS 2-36 RD (Art.No.BZP042V36RD-0001R)
PZZ-000292979
PKB100IIPL000895/KB 100-IIPL-DN40
SF 3/32 RD-O
PSF4-63RD-180435R
ASF2-20RD-170426R Đại lý Steimel Việt Nam
SF 3/50 RD-VLFM
Gear pump unit complete. with 4 kW motor, four-pole, 230/400 V, 50 Hz, IE3, assembled with lantern, base and coupling. Housing material: cast iron. Pinion shafts: 1.7139 helical gearing. Shaft seal: radial shaft seal. Elastomers: FKM. Bearings: plain bearings. Connections: SAE 1 1/2″. with pressure relief valve set to 8 bar
SF 2/13RD
HYDRAULIC BOMB LUBRICATION SF 2/13 RD ST HYDRAULIC BOMB LUBRICATION SF 2/13 RD STEIMEL TYPE LUBRICATION REFERENCE BZ52013RD-051 MANUFACTURING STEIMEL (KABELSCHLEPP) MODEL SF 2/13 RD SERIES 972413 FLOWING LUBE OIL VAZÃO 16 L/MIN (APPROXIMATE) PRESSURE OF WORK 5 BAR PRESSURE MINIMUM 2 BAR PRESSURE MAXIMUM 20 BAR VISCOSITY 50-5000 CST NOMINAL ROTATION 1720 RPM SENSE OF ROTATION HOURLY SENSE MATERIAL CG-25 (CARCASS) NBR (ELASTÔMERO) CONSTRUCTION CARCASS HARDENED STEEL 16MNCRS5, POLISHED FLANGE AND HELICAL TEETH, ROLAMENT MULTILAYER MD, RADIAL AXIS – RING OF IT SEALS CONNECTION OF SUCTION G1 / SAE1 CONNECTION OF PRESSURE G1 / SAE1 CERTIFICATE TEST OF OPERATION DRAWING OF THE MAKER DMB052D-03 (YOU GIVE. DIMENSIONAL) I DRAW DET052013RD-0050 (IT LISTS PIECES APPLICATION TRANSPORTS FAST 1 AND 2 – L.A OBSERVATION TYPE OF THE PLATE ETY924-D/E-XC02
SF 2/13RD-VLFM
Pump type SF 2/13RD-VLFM gear pump in block design complete with motor 1.1 kW, Four-pole, 230/400 V, 50 Hz, IP 55, IE3, with coupling, base, and lantern
SF 3/50 R
Pump type SF 3/50 R horizontal gear pump with free shaft end. Housing material: GG-25. Pinion shafts: 1.7139, helical, nitrided. Shaft seal: radial shaft seal. Elastomers: FKM. Connections: SAE 1 1/2″. Rotation direction: clockwise
SF 2/5 RD
Starting oil pump, clockwise rotation, without motor Đại lý Steimel Việt Nam
SF 4/112RD
GEAR PUMP SF4/112 RD WITH FREE SHAFT END. MANUFACTURER: STEIMEL. 150 L/MI. STARTING TEMP. > 10 DEG. CENTW/PRESSURE. LIMITING VALVE SET TOP > 8 BAR (WITHOUT MOTOR) FOR RM 3 & CM 3 GEARBOX LUBRICATION
063502-1
Pump type SF 3/40 R Steimel gear pump with free shaft end. Housing material: Cast iron. Pinion shaft: 1.7225. Noise-optimized gearing. Mechanical seal: RWD. Plain bearing: Multi-layer MD. Rotation direction: Right. Connections: 1 1/2″ SAE
1.PU16-1128-2
TFE10-240PDG
Repair kit for bitumen pumps
ASF3-32RD-172168R
Geared motor ASF3-32RD-172168R. Gear pump unit: SF 3/32 RD – VLFM. Article no.: ASF3-32RD-172168R. Dimension sheet: DPA053D-172168R. Spare parts list: DET053032RD – 165R. Suction u. Pressure connection: SAE 1 ½ Housing parts: EN-GJL-250 (GG-25) Pinion shafts, noise optimized. : 16MnCrS5, egh., Oblique. Shaft seal: Radial shaft seal Elastomers: FKM Storage: MD multilayer Fluid: Lubricating oil Viscosity: 50-5000 cSt. temperature: 10-60°C Flow rate: approx. 49 / 59.2 l / min Pressure: 5 bar Speed: 1450/1750 1 / min Pressure relief valve Opening pressure: 12 bar Adjustment range: 2-18 bar Direction of rotation: right Test run: yes, with HLPD 46 Bellhousing: BLF053250128LA21 Clutch: BKUA055-1928-301 Three-phase standard motor: LDM100-04-904 (birch bark) engine data: Power 1/2: 3.0 / 3.4 kW Speed 1/2: 1500/1800 1 / min Voltage / Frequency 1: 230/400 volts at 50 Hz Voltage / Frequency 2: 265/460 volts at 60 Hz Efficiency class: IE3 Additional label without CE and IE3 marking: Voltage / Frequency: 220-240 / 380-420 volts at 50/60 Hz Voltage / Frequency: 250-280 / 440-480 volts at 60 Hz Protection class: IP 55 Insulation class: F Design: B 5 Aggregate paint: primed Nameplate: ETY924-D / E – PE02
SF2-13RD.-VLFM
Motor TYR: SF2-13RD.-VLFM F-NR: 000.001.153.800 A-NR: 04.1800-1
5AP112M4-7AA
Electric motor 4 kW, 4-pole, 400/690 V, 50 Hz, IE3, flange B5 Origin:
CH4
Door seal for dryer centrifuge, 10 meters Đại lý Steimel Việt Nam
for type TM10-240PDDM-GKM
The ring for the pump/N 1.PU112648 type TM 1240 PDDM drive shaft with gear
for type TE3-80PDD-GKGM
Drive pinion suitable for type TE3-80PDD-GKGM, corresponding serial number: 1.PU11 2648-1
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Steimel Việt Nam / Hotline : 0938 906 663
JIE chuyên cung cấp : Động cơ giảm tốc JIE, Hộp giảm tốc JIE, Hộp số JIE, Bộ nâng vít JIE, Hộp số hành tinh JIE, Bộ chuyển hướng bánh răng JIE, Bánh răng trục vít JIE, Hộp truyền động JIE.
Thành lập năm 1988, JIE luôn kiên trì sản xuất hộp giảm tốc chất lượng cao trong suốt 100 năm, hướng đến xây dựng một doanh nghiệp trăm năm tuổi với tay nghề thủ công tinh xảo.
JIE Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
JIE HGP Viet Nam
JRTR Helical Inline Gearmotors
Model：17~187
Ratio：3.37~289.74
Input power：0.12~250 kW
Output torque：2.4~56494 N.m
JRTF Parallel Shaft-Helical Gearmotors
Model：37~167
Ratio：3.77~281.71
Input power：0.12~250kW
Output torque：3.5~37125N.m
JRTK Helical-Bevel Gearmotors
Model：37~187
Ratio：3.98~197.37
Input power： 0.12~200kW
Output torque：10~62800N.m
JRTS Helical-Worm Gearmotors
Model：37~97
Ratio：6.8~288
Input power： 0.12~22kW
Output torque：11~4900N.m
JCM Frequency Conversion Gearmotor
Size：0004~0075
Power：0.37~7.
Ingress Protection： IP54 ~IP65
Mains supply：3X380~440VAC
Out frequency :0~200Hz
Module combination figure
JRHH Parallel Shaft Gear Units
Model：3~28
Ratio：1.25~450
Input power：4.3~10515kW
Output torque：2300~1400000N.m
JRHB Helical-Bevel Gear Units
Model：4~28
Ratio：5~400
Input power：2.8~4908kW
Output torque：5500~1400000N.m
JRHD Bucket Elevator Gear Units
Model：5~16
Ratio：25~71
Input power：16~1305kW
output torque：11000~173000N.m
JROKE Palm Oil Gear Units
ratio:56,80
Input power: 106,141kW
Output torque: 75000N.m
JRHA2SV Air-Cooled Gear Units
Model：166
Ratio：14
Input power：228kW
Output torque：21000N.m
JRP Planetary Gear Units
Model：9~36
Ratio：25~4000
Input power:0.4~12934Kw
Output torque：2600000N.m
JRPE Planetary Gear Units
Model：01~8
Ratio:3.08~3460
Input power:0.02~192Kw
Output torque:1000~13000N.m
JRPH Planetary Gear Units
Model: 08~100
Ratio: 3.4~2000
Input power:75~250Kw
Output torque:8000~100000N.m
JRPG Port Equipment Planetary Gear Units
Model: 09~30
Ratio: 25~280
Input power:6.2~5970kw
Output torque:22000~1200000N.m
JRPN Mixer Planetary Gear Units
Model:11~13
Ratio:27~100
Input power:30~75kw
Output torque:12000~83000N.m
JRWD Worm Gears
Model：25~90
Ratio：7.5~100
Input power：0.06~4kW
Output torque：2.6~610N.m
JRW Worm Gears
Model：30~90
Ratio：7.5~100
Input power：0.1~6.3kW
Output torque：13~610N.m
JRWD Worm Gears
Model：110~150
Ratio：7.5~100
Input power：1.1~15kW
Output torque：281~3057N.m
JRW Worm Gears
Model：110~150
Ratio：7.5~100
Input power：1.1~25.8kW
Output torque：483~3057N.m
JRWND Worm Gears
Model：30~150
Ratio：7.5~100
Input power：0.06~15kW
Output torque：2.6~3057N.m
JD../P Gear Motors
Model：63~315
Input power：0.12~200kW
Efficiency：IE2,IE3(0.75~200kw)
JD../E IEC Motors
Model：63~315
Input power：0.12~200kW
Efficiency：IE2,IE3(0.75~200kw)
JD../BE Brake Motors
Model：63~250
Input power：0.12~45kW
Efficiency：IE2,IE3(0.75~45kw)
JDB.. Explosion-Proof Motors
Model: 80~315
Power:0.75~200Kw
Explosive-Proof Grade:ExibⅡBT4
Efficiency:IE2,IE3
JDC Servo Motors
Model: 01~13
Power Input: 0.5~4.2kW
Torque Rated: 2~13N.m
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
JIE Việt Nam / Hotline : 0938 906 663
JIE chuyên cung cấp : Động cơ giảm tốc JIE, Hộp giảm tốc JIE, Hộp số JIE, Bộ nâng vít JIE, Hộp số hành tinh JIE, Bộ chuyển hướng bánh răng JIE, Bánh răng trục vít JIE, Hộp truyền động JIE.
Thành lập năm 1988, JIE luôn kiên trì sản xuất hộp giảm tốc chất lượng cao trong suốt 100 năm, hướng đến xây dựng một doanh nghiệp trăm năm tuổi với tay nghề thủ công tinh xảo.
JIE Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
JIE HGP Viet Nam
JRTR Helical Inline Gearmotors
Model：17~187
Ratio：3.37~289.74
Input power：0.12~250 kW
Output torque：2.4~56494 N.m
JRTF Parallel Shaft-Helical Gearmotors
Model：37~167
Ratio：3.77~281.71
Input power：0.12~250kW
Output torque：3.5~37125N.m
JRTK Helical-Bevel Gearmotors
Model：37~187
Ratio：3.98~197.37
Input power： 0.12~200kW
Output torque：10~62800N.m
JRTS Helical-Worm Gearmotors
Model：37~97
Ratio：6.8~288
Input power： 0.12~22kW
Output torque：11~4900N.m
JCM Frequency Conversion Gearmotor
Size：0004~0075
Power：0.37~7.
Ingress Protection： IP54 ~IP65
Mains supply：3X380~440VAC
Out frequency :0~200Hz
Module combination figure
JRHH Parallel Shaft Gear Units
Model：3~28
Ratio：1.25~450
Input power：4.3~10515kW
Output torque：2300~1400000N.m
JRHB Helical-Bevel Gear Units
Model：4~28
Ratio：5~400
Input power：2.8~4908kW
Output torque：5500~1400000N.m
JRHD Bucket Elevator Gear Units
Model：5~16
Ratio：25~71
Input power：16~1305kW
output torque：11000~173000N.m
JROKE Palm Oil Gear Units
ratio:56,80
Input power: 106,141kW
Output torque: 75000N.m
JRHA2SV Air-Cooled Gear Units
Model：166
Ratio：14
Input power：228kW
Output torque：21000N.m
JRP Planetary Gear Units
Model：9~36
Ratio：25~4000
Input power:0.4~12934Kw
Output torque：2600000N.m
JRPE Planetary Gear Units
Model：01~8
Ratio:3.08~3460
Input power:0.02~192Kw
Output torque:1000~13000N.m
JRPH Planetary Gear Units
Model: 08~100
Ratio: 3.4~2000
Input power:75~250Kw
Output torque:8000~100000N.m
JRPG Port Equipment Planetary Gear Units
Model: 09~30
Ratio: 25~280
Input power:6.2~5970kw
Output torque:22000~1200000N.m
JRPN Mixer Planetary Gear Units
Model:11~13
Ratio:27~100
Input power:30~75kw
Output torque:12000~83000N.m
JRWD Worm Gears
Model：25~90
Ratio：7.5~100
Input power：0.06~4kW
Output torque：2.6~610N.m
JRW Worm Gears
Model：30~90
Ratio：7.5~100
Input power：0.1~6.3kW
Output torque：13~610N.m
JRWD Worm Gears
Model：110~150
Ratio：7.5~100
Input power：1.1~15kW
Output torque：281~3057N.m
JRW Worm Gears
Model：110~150
Ratio：7.5~100
Input power：1.1~25.8kW
Output torque：483~3057N.m
JRWND Worm Gears
Model：30~150
Ratio：7.5~100
Input power：0.06~15kW
Output torque：2.6~3057N.m
JD../P Gear Motors
Model：63~315
Input power：0.12~200kW
Efficiency：IE2,IE3(0.75~200kw)
JD../E IEC Motors
Model：63~315
Input power：0.12~200kW
Efficiency：IE2,IE3(0.75~200kw)
JD../BE Brake Motors
Model：63~250
Input power：0.12~45kW
Efficiency：IE2,IE3(0.75~45kw)
JDB.. Explosion-Proof Motors
Model: 80~315
Power:0.75~200Kw
Explosive-Proof Grade:ExibⅡBT4
Efficiency:IE2,IE3
JDC Servo Motors
Model: 01~13
Power Input: 0.5~4.2kW
Torque Rated: 2~13N.m
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
JIE Việt Nam / Hotline : 0938 906 663
JIANG YIN FUXIN chuyên cung cấp : Van ngắt khí áp suất âm JIANG YIN FUXIN, Van cửa khí áp suất dương JIANG YIN FUXIN, Van hai chiều JIANG YIN FUXIN, Bộ lọc mùa đông JIANG YIN FUXIN, Máy trộn đa năng JIANG YIN FUXIN, Bơm JIANG YIN FUXIN.
Công ty TNHH Máy móc Jiangyin Fuxin, tiền thân là Nhà máy Máy móc Thực phẩm Jiangyin, là một doanh nghiệp do toàn thể nhân dân sở hữu. Nhà máy được thành lập năm 1969 và có lịch sử 50 năm.
JIANG YIN FUXIN Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
JIANG YIN FUXIN HGP Viet Nam
Negative pressure air shutoff
Positive pressure air shutter
Double-way valve
Winter filter
Multieffect mixer
Pump
Winter filter
Winter filter
Two-way valve
Two-way valve
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Sweeping positive pressure air brake
Sweeping positiv
Stainless steel airlock
Stainless steel
Flour special combination airlock
Flour special co
Offset airlock
Chemical pump
Soap foot pump
YBLR Series solvent pump
YBLR Series solv
YBND-Z Dosing pump
YBND-Z Dosing pu
YBND Dosing pump
Series multi-effect mixer
Series multi-eff
YRXDLJ50-250 Winter filter
YRXDLJ50-250 Win
Negative pressure air shutoff
Positive pressure air shutter
Double-way valve
Winter filter
Multieffect mixer
Pump
Winter filter
Winter filter
Two-way valve
Two-way valve
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Sweeping positive pressure air brake
Sweeping positiv
Stainless steel airlock
Stainless steel
Flour special combination airlock
Flour special co
Offset airlock
Chemical pump
Soap foot pump
YBLR Series solvent pump
YBLR Series solv
YBND-Z Dosing pump
YBND-Z Dosing pu
YBND Dosing pump
Series multi-effect mixer
Series multi-eff
YRXDLJ50-250 Winter filter
YRXDLJ50-250 Win
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
JIANG YIN FUXIN Việt Nam / Hotline : 0938 906 663
JIANG YIN FUXIN chuyên cung cấp : Van ngắt khí áp suất âm JIANG YIN FUXIN, Van cửa khí áp suất dương JIANG YIN FUXIN, Van hai chiều JIANG YIN FUXIN, Bộ lọc mùa đông JIANG YIN FUXIN, Máy trộn đa năng JIANG YIN FUXIN, Bơm JIANG YIN FUXIN.
Công ty TNHH Máy móc Jiangyin Fuxin, tiền thân là Nhà máy Máy móc Thực phẩm Jiangyin, là một doanh nghiệp do toàn thể nhân dân sở hữu. Nhà máy được thành lập năm 1969 và có lịch sử 50 năm.
JIANG YIN FUXIN Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
JIANG YIN FUXIN HGP Viet Nam
Negative pressure air shutoff
Positive pressure air shutter
Double-way valve
Winter filter
Multieffect mixer
Pump
Winter filter
Winter filter
Two-way valve
Two-way valve
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Sweeping positive pressure air brake
Sweeping positiv
Stainless steel airlock
Stainless steel
Flour special combination airlock
Flour special co
Offset airlock
Chemical pump
Soap foot pump
YBLR Series solvent pump
YBLR Series solv
YBND-Z Dosing pump
YBND-Z Dosing pu
YBND Dosing pump
Series multi-effect mixer
Series multi-eff
YRXDLJ50-250 Winter filter
YRXDLJ50-250 Win
Negative pressure air shutoff
Positive pressure air shutter
Double-way valve
Winter filter
Multieffect mixer
Pump
Winter filter
Winter filter
Two-way valve
Two-way valve
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Stainless steel airlock
Stainless steel
Sweeping positive pressure air brake
Sweeping positiv
Stainless steel airlock
Stainless steel
Flour special combination airlock
Flour special co
Offset airlock
Chemical pump
Soap foot pump
YBLR Series solvent pump
YBLR Series solv
YBND-Z Dosing pump
YBND-Z Dosing pu
YBND Dosing pump
Series multi-effect mixer
Series multi-eff
YRXDLJ50-250 Winter filter
YRXDLJ50-250 Win
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
JIANG YIN FUXIN Việt Nam / Hotline : 0938 906 663
HAUBER Elektronik chuyên cung cấp : Cảm biến HAUBER Elektronik, Cảm biến rung HAUBER Elektronik. Đại lý HAUBER Elektronik Việt Nam
HAUBER Elektronik là nhà sản xuất hàng đầu về công nghệ đo lường rung động chất lượng cao, hiệu quả và dễ sử dụng. Với các sản phẩm của mình, chúng tôi không chỉ nỗ lực đáp ứng các tiêu chuẩn và hướng dẫn hiện hành mà còn liên tục vượt trội về chất lượng và sự đổi mới.
HAUBER Elektronik Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
HAUBER Elektronik HGP Viet Nam
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.002
Item no.: 13065
GTIN: 4255921300074
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.003
Item no.: 13066
GTIN: 4255921300081
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.004
Item no.: 13067
GTIN: 4255921300098
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.005
Item no.: 13093
GTIN: 4255921300319
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.006
Item no.: 13083
GTIN: 4255921300258
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.012
Item no.: 13172
GTIN: 4255921300371
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.013
Item no.: 13516
GTIN: 4255921300388
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.014
Item no.: 13521
GTIN: 4255921300395
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.015
Item no.: 13524
GTIN: 4255921300401
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.016
Item no.: 13525
GTIN: 4255921300418
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.017
Item no.: 13526
GTIN: 4255921300425
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.018
Item number: 13527
GTIN: 4255921300432
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.019
Item no.: 13528
GTIN: 4255921300449
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.020
Item no.: 13529
GTIN: 4255921300456
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.031
Item no.: 14303
GTIN: 4255921300579
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.102
Item no.: 14306
GTIN: 4255921300586
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.002
Item no.: 13071
GTIN: 4255921300135
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.003
Item no.: 13073
GTIN: 4255921300159
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.004
Item no.: 13075
GTIN: 4255921300173
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.005
Item no.: 13095
GTIN: 4255921300333
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.006
Item no.: 13085
GTIN: 4255921300272
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.012
Item no.: 14321
GTIN: 4255921300739
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.013
Item no.: 14322
GTIN: 4255921300746
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.014
Item no.: 13817
GTIN: 4255921300470
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.015
Item no.: 14323
GTIN: 4255921300753
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.016
Item no.: 14324
GTIN: 4255921300760
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.017
Item no.: 14325
GTIN: 4255921300777
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.018
Item no.: 14225
GTIN: 4255921300562
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
HAUBER Elektronik Việt Nam / Hotline : 0938 906 663
HAUBER Elektronik chuyên cung cấp : Cảm biến HAUBER Elektronik, Cảm biến rung HAUBER Elektronik. Đại lý HAUBER Elektronik Việt Nam
HAUBER Elektronik là nhà sản xuất hàng đầu về công nghệ đo lường rung động chất lượng cao, hiệu quả và dễ sử dụng. Với các sản phẩm của mình, chúng tôi không chỉ nỗ lực đáp ứng các tiêu chuẩn và hướng dẫn hiện hành mà còn liên tục vượt trội về chất lượng và sự đổi mới.
HAUBER Elektronik Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
HAUBER Elektronik HGP Viet Nam
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.002
Item no.: 13065
GTIN: 4255921300074
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.003
Item no.: 13066
GTIN: 4255921300081
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.004
Item no.: 13067
GTIN: 4255921300098
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.005
Item no.: 13093
GTIN: 4255921300319
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.006
Item no.: 13083
GTIN: 4255921300258
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.012
Item no.: 13172
GTIN: 4255921300371
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.013
Item no.: 13516
GTIN: 4255921300388
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.014
Item no.: 13521
GTIN: 4255921300395
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.015
Item no.: 13524
GTIN: 4255921300401
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.016
Item no.: 13525
GTIN: 4255921300418
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.017
Item no.: 13526
GTIN: 4255921300425
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.018
Item number: 13527
GTIN: 4255921300432
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.019
Item no.: 13528
GTIN: 4255921300449
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.020
Item no.: 13529
GTIN: 4255921300456
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.031
Item no.: 14303
GTIN: 4255921300579
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.0.102
Item no.: 14306
GTIN: 4255921300586
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.002
Item no.: 13071
GTIN: 4255921300135
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.003
Item no.: 13073
GTIN: 4255921300159
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.004
Item no.: 13075
GTIN: 4255921300173
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.005
Item no.: 13095
GTIN: 4255921300333
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.006
Item no.: 13085
GTIN: 4255921300272
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.012
Item no.: 14321
GTIN: 4255921300739
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.013
Item no.: 14322
GTIN: 4255921300746
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.014
Item no.: 13817
GTIN: 4255921300470
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.015
Item no.: 14323
GTIN: 4255921300753
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.016
Item no.: 14324
GTIN: 4255921300760
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.017
Item no.: 14325
GTIN: 4255921300777
Vibration sensor HE050.0.0.0.002 (Article number: 13065)
Vibration sensor
HE050.0.0.1.018
Item no.: 14225
GTIN: 4255921300562
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
HAUBER Elektronik Việt Nam / Hotline : 0938 906 663
Goldammer Regelungstechnik chuyên cung cấp : Bộ điều chỉnh mức Goldammer Regelungstechnik, Bộ điều chỉnh nhiệt độ Goldammer Regelungstechnik, Bộ điều khiển mức Goldammer Regelungstechnik. Đại lý Goldammer Regelungstechnik Việt Nam
Goldammer Regelungstechnik GmbH là một công ty nổi tiếng với những phát triển đổi mới, chất lượng và độ chính xác đo lường. Trong hơn 37 năm, chúng tôi đã phát triển, sản xuất và bán các sản phẩm kỹ thuật đo lường chất lượng cao cũng như các ứng dụng kỹ thuật điều khiển được sử dụng trên toàn thế giới.
Goldammer Regelungstechnik Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Goldammer Regelungstechnik HGP Viet Nam
IN-GB-100
NR 1/2″-3/4″-M20-M24
IN-GB-100A
NR 1/2″-3/4″-M20
IN-GB-100B
NR 25-50
IN-GB-100E Đại lý Goldammer Regelungstechnik Việt Nam
NR 1/2″A-3/4″A-M20A
IN-GB-101
NR 30 / 50
IN-GB-102
NR 70 / 85
IN-GB-104
NR 30 / 50 / 70 / 85 – V
IN-GB-105
NR 70
IN-GB-106
NR 70 / 85 – V
IN-GB-106A
NR 70 / 85 – V
IN-GB-108
NR 85
IN-GB-108B
NR 85 – 150°C max.
IN-GB-111A
NR 95
IN-GB-112
NR 1″-1 1/4″
IN-GB-112A
NR 3/4″ – 150°C max.
IN-GB-112B
NR 1″ – 1 1/4″ – 150°C max.
IN-GB-112C
NR M30 x 1,5
IN-GB-114
NR 1 1/2″
IN-GB-115
NR 2″
IN-GB-115C
NR 2″ – 150°C max.
IN-GB-116
NR 1 / 120 Đại lý Goldammer Regelungstechnik Việt Nam
IN-GB-119
NR 6 / 32
IN-GB-003
IN-GB-004
IN-GB-005
IN-GB-006
IN-GB-100D
NR 1/2″-3/4″-M20-M24-Desina
IN-GB-105B
NR 70 / 85 -Desina Đại lý Goldammer Regelungstechnik Việt Nam
AM-GB-200/2
NRA – BLA – G1/2″
AM-GB-202F
NRA 25RS/DN50 x …
MA-GB-300/0
NR 1/2″-3/4″-G1″-M20-M24-TMA…
MA-GB-300/0A
NR 1/2″A-3/4″A-M20A-TMA…
MA-GB-300/0B
NR 1/2″-3/4″-G1″-M20-TMA…
MA-GB-300/A
NR 1″-1 1/4″-TMA…
MA-GB-300/1
NR 50 / 70 / 85 – TMA
MA-GB-300
NR 70-TMA
MA-GB-301
NR 85-TMA
MA-GB-302
NR 85-TMA-150°C
MA-GB-302A
NR 3/4″-TMA-150°C
MA-GB-303A
NR 95-TMA
MA-GB-304
NR 1/120 – TMA
MA-GB-305
NR 6/32 – TMA
MA-GB-305A
NR 50 / 70 / 85 – MA
MA-GB-305A/1
NR 1/2″-3/4″-M20-M24-MA(O)(T)-Art.Nr. …
MA-GB-305/A2
NR 3/4″-MA…
TR-GB-500B
TR12 – T 0°C-80°C, 0°C-120°C Đại lý Goldammer Regelungstechnik Việt Nam
TR-GB-500B/4
TR12 – T – Plug connector 0°C-80°C
TR-GB-503
TR – G…
TR-GB-503A
TR – G…
TR-GB-503B
TR – G…
EX – GB – 100A
NR 1/2″- 3/4″- M20 – M24 – EExi
EX – GB – 103
NR 30 / 50 – Eexi
EX – GB – 107
NR 70 – EExi
EX – GB – 113
NR 1″- 1 1/4″- 1 1/2″ – EExi
EX – GB – 115A
NR 2″ – EExi
EX – GB – 300/0
NR 1/2″- 3/4″- G1″ – M20 – TMA – EExi
EX – GB – 300
NR 70 – TMA – EExi Đại lý Goldammer Regelungstechnik Việt Nam
EX – GB – 300/A
NR 1″ – 1 1/4″-1 1/2″ – TMA – EExi
EX – GB – 301
NR 85 – TMA – EExi
EX – GB – 305B
NR 1″- 1 1/4″- MA – EExi
seq. no. EX-GB 001, Plug types
seq. no. EX-GB 104, NR 30 / 50 / 70 / 85 – V – EExi, Level regulator
seq. no. EX-GB 108b, NR 85 – 150 °C max. – EExi, Level regulator
seq. no. EX-GB 110, NR 85 – EExi, Level regulator
seq. no. EX-GB 111, NR 85 – EExi, Level regulator
seq. no. EX-GB 200c, NRA 6R BA/… – EExi, Level regulator
seq. no. EX-GB 201a, NRA 6R BA/… – EExi, Level regulator
seq. no. EX-GB 201b, NRA 25R/… – EExi, Level regulator…
seq. no. EX-GB 305, NR 50 – MA – EExi, Level – temperature controller
seq. no. EX-GB 307c, NR 70 – MA – EExi, Level – temperature controller
seq. no. EX-GB 308, NR 85 – MA – EExi, Level – temperature controller
seq. no. EX-GB 308a,NR 85 – 150 °C max. – EExi – MA, Level – temperature controller
seq. no. EX-GB 308b, NR 85 – V – EExi – MA, Level – temperature controller
seq. no. EX-GB 309, NR 95 – MA – EExi, Level – temperature controller
seq. no. EX-GB 309/1, NR – 11/2″ – MA – EExi, Level – temperature cntroller
seq. no. EX-GB 310, NR 2″ – MA – EExi, Level – temperature controller
seq. no. EX-GB 311, NR 6/32 – MA – EExi, Level – temperature controller
seq. no. EX-GB 402, NTR… – K – EExi, regulator
seq. no. EX-GB 403, NTR… – K – EExi – with plug socket connector, regulator
seq. no. EX-GB 500c, TR 12 – K – EExi, regulator
seq. no. EX-GB 501a, TR 15 – K3 / K4 – EExi, regulator
seq. no. EX-GB 505, TR 4 – G1/2″ – EExi, Temperature transducer
seq. no. EX-GB 506a, WTR – G 1/2″ – EExi, Resistance thermometer Pt100
seq. no. EX-GB 508, TRW – G… – EExi, Temperature monitor
seq. no. EX-GB 705, WM 2 – G – EExi, Water indicator
seq. no. EX-GB 900, Schaltverstärker, Field Circuit Ex i / I.S.
seq. no. EX-GB 901, Isolators, Ex Resistance Isolator for Pt 100
seq. no. EX-GB 902, Transmitter, Field Circuit Ex i Output 0/4-20mA
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Goldammer Regelungstechnik Việt Nam / Hotline : 0938 906 663
Goldammer Regelungstechnik chuyên cung cấp : Bộ điều chỉnh mức Goldammer Regelungstechnik, Bộ điều chỉnh nhiệt độ Goldammer Regelungstechnik, Bộ điều khiển mức Goldammer Regelungstechnik. Đại lý Goldammer Regelungstechnik Việt Nam
Goldammer Regelungstechnik GmbH là một công ty nổi tiếng với những phát triển đổi mới, chất lượng và độ chính xác đo lường. Trong hơn 37 năm, chúng tôi đã phát triển, sản xuất và bán các sản phẩm kỹ thuật đo lường chất lượng cao cũng như các ứng dụng kỹ thuật điều khiển được sử dụng trên toàn thế giới.
Goldammer Regelungstechnik Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
Goldammer Regelungstechnik HGP Viet Nam
IN-GB-100
NR 1/2″-3/4″-M20-M24
IN-GB-100A
NR 1/2″-3/4″-M20
IN-GB-100B
NR 25-50
IN-GB-100E Đại lý Goldammer Regelungstechnik Việt Nam
NR 1/2″A-3/4″A-M20A
IN-GB-101
NR 30 / 50
IN-GB-102
NR 70 / 85
IN-GB-104
NR 30 / 50 / 70 / 85 – V
IN-GB-105
NR 70
IN-GB-106
NR 70 / 85 – V
IN-GB-106A
NR 70 / 85 – V
IN-GB-108
NR 85
IN-GB-108B
NR 85 – 150°C max.
IN-GB-111A
NR 95
IN-GB-112
NR 1″-1 1/4″
IN-GB-112A
NR 3/4″ – 150°C max.
IN-GB-112B
NR 1″ – 1 1/4″ – 150°C max.
IN-GB-112C
NR M30 x 1,5
IN-GB-114
NR 1 1/2″
IN-GB-115
NR 2″
IN-GB-115C
NR 2″ – 150°C max.
IN-GB-116
NR 1 / 120 Đại lý Goldammer Regelungstechnik Việt Nam
IN-GB-119
NR 6 / 32
IN-GB-003
IN-GB-004
IN-GB-005
IN-GB-006
IN-GB-100D
NR 1/2″-3/4″-M20-M24-Desina
IN-GB-105B
NR 70 / 85 -Desina Đại lý Goldammer Regelungstechnik Việt Nam
AM-GB-200/2
NRA – BLA – G1/2″
AM-GB-202F
NRA 25RS/DN50 x …
MA-GB-300/0
NR 1/2″-3/4″-G1″-M20-M24-TMA…
MA-GB-300/0A
NR 1/2″A-3/4″A-M20A-TMA…
MA-GB-300/0B
NR 1/2″-3/4″-G1″-M20-TMA…
MA-GB-300/A
NR 1″-1 1/4″-TMA…
MA-GB-300/1
NR 50 / 70 / 85 – TMA
MA-GB-300
NR 70-TMA
MA-GB-301
NR 85-TMA
MA-GB-302
NR 85-TMA-150°C
MA-GB-302A
NR 3/4″-TMA-150°C
MA-GB-303A
NR 95-TMA
MA-GB-304
NR 1/120 – TMA
MA-GB-305
NR 6/32 – TMA
MA-GB-305A
NR 50 / 70 / 85 – MA
MA-GB-305A/1
NR 1/2″-3/4″-M20-M24-MA(O)(T)-Art.Nr. …
MA-GB-305/A2
NR 3/4″-MA…
TR-GB-500B
TR12 – T 0°C-80°C, 0°C-120°C Đại lý Goldammer Regelungstechnik Việt Nam
TR-GB-500B/4
TR12 – T – Plug connector 0°C-80°C
TR-GB-503
TR – G…
TR-GB-503A
TR – G…
TR-GB-503B
TR – G…
EX – GB – 100A
NR 1/2″- 3/4″- M20 – M24 – EExi
EX – GB – 103
NR 30 / 50 – Eexi
EX – GB – 107
NR 70 – EExi
EX – GB – 113
NR 1″- 1 1/4″- 1 1/2″ – EExi
EX – GB – 115A
NR 2″ – EExi
EX – GB – 300/0
NR 1/2″- 3/4″- G1″ – M20 – TMA – EExi
EX – GB – 300
NR 70 – TMA – EExi Đại lý Goldammer Regelungstechnik Việt Nam
EX – GB – 300/A
NR 1″ – 1 1/4″-1 1/2″ – TMA – EExi
EX – GB – 301
NR 85 – TMA – EExi
EX – GB – 305B
NR 1″- 1 1/4″- MA – EExi
seq. no. EX-GB 001, Plug types
seq. no. EX-GB 104, NR 30 / 50 / 70 / 85 – V – EExi, Level regulator
seq. no. EX-GB 108b, NR 85 – 150 °C max. – EExi, Level regulator
seq. no. EX-GB 110, NR 85 – EExi, Level regulator
seq. no. EX-GB 111, NR 85 – EExi, Level regulator
seq. no. EX-GB 200c, NRA 6R BA/… – EExi, Level regulator
seq. no. EX-GB 201a, NRA 6R BA/… – EExi, Level regulator
seq. no. EX-GB 201b, NRA 25R/… – EExi, Level regulator…
seq. no. EX-GB 305, NR 50 – MA – EExi, Level – temperature controller
seq. no. EX-GB 307c, NR 70 – MA – EExi, Level – temperature controller
seq. no. EX-GB 308, NR 85 – MA – EExi, Level – temperature controller
seq. no. EX-GB 308a,NR 85 – 150 °C max. – EExi – MA, Level – temperature controller
seq. no. EX-GB 308b, NR 85 – V – EExi – MA, Level – temperature controller
seq. no. EX-GB 309, NR 95 – MA – EExi, Level – temperature controller
seq. no. EX-GB 309/1, NR – 11/2″ – MA – EExi, Level – temperature cntroller
seq. no. EX-GB 310, NR 2″ – MA – EExi, Level – temperature controller
seq. no. EX-GB 311, NR 6/32 – MA – EExi, Level – temperature controller
seq. no. EX-GB 402, NTR… – K – EExi, regulator
seq. no. EX-GB 403, NTR… – K – EExi – with plug socket connector, regulator
seq. no. EX-GB 500c, TR 12 – K – EExi, regulator
seq. no. EX-GB 501a, TR 15 – K3 / K4 – EExi, regulator
seq. no. EX-GB 505, TR 4 – G1/2″ – EExi, Temperature transducer
seq. no. EX-GB 506a, WTR – G 1/2″ – EExi, Resistance thermometer Pt100
seq. no. EX-GB 508, TRW – G… – EExi, Temperature monitor
seq. no. EX-GB 705, WM 2 – G – EExi, Water indicator
seq. no. EX-GB 900, Schaltverstärker, Field Circuit Ex i / I.S.
seq. no. EX-GB 901, Isolators, Ex Resistance Isolator for Pt 100
seq. no. EX-GB 902, Transmitter, Field Circuit Ex i Output 0/4-20mA
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Goldammer Regelungstechnik Việt Nam / Hotline : 0938 906 663
KEBA chuyên cung cấp : Bộ điều khiển KEBA, Bộ điều khiển servo KEBA, Động cơ KEBA, Vòng bi từ tính KEBA, Mô-đun KEBA.
Tự động hóa công nghiệp KEBA là một trong ba lĩnh vực kinh doanh của tập đoàn KEBA, có trụ sở chính tại Linz/Áo từ khi thành lập năm 1968. Với hơn 25 công ty con, KEBA hiện diện trên 15 quốc gia trên thế giới. Các giải pháp tự động hóa của chúng tôi không bắt đầu từ bí quyết công nghệ mà từ nhu cầu của bạn.
KEBA Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
KEBA HGP Viet Nam
KeTop T70
KeTop T150
KeTop T155
KeTop T200
KeTop T15x Safe Wireless
KeTop T150/T155 Safe Wireless
KeTop T135
KeTop T135 ECO
KeTop AP 500
OP300 keyboard panels
KeTop OP 300 Keyboard Panels
stationary singletouch panel OP300/400
KeTop OP 300/400 Singletouch
KeTop OP500 Multitouch
KeTop OP 500 Multitouch
KeControl C5
Control KeControl C1
KeControl C1
Robotic control KeDrive D3
KeDrive D3 Control
AI extension module
KeDrive D3
Energy-efficient multi-axis system with single, double and three-axis servo controllers up to 300 A and integrated safety technology.
KeDrive D3 Smart DC Systems
Optimizes energy flows in machines and reduces load peaks through controlled energy storage in the DC link.
Picture of KeDrive D3-AC isolated on a light background
KeDrive D3-AC
Compact AC-powered all-in-one servo controller with up to 3 axes as well as mains filter and braking resistor in just one module.
KeDrive D5
Single-axis controller for apparatus and mechanical engineering. With 24 – 48 V DC, ideal for mobile applications, e.g. in intralogistics.
ServoOne
Single-axis system with up to 450 A. It offers maximum flexibility thanks to various fieldbus profiles, integrated PLC and much more.
ServoOne TL
The solution for high-speed applications – with three-level technology. Ideal for turbo machines and demanding industrial applications.
c-line Drives
The proven single-axis controller, which covers all basic functions for reliable drive solutions in machine and plant engineering.
PitchOne
Optimized for pitch control in wind turbines: rugged, low-maintenance, highly available – with TÜV-certified emergency drive (PLe).
PitchMaster II+
This proven pitch drive is used in wind turbines worldwide – with high integration and availability, robust design and certified functional safety.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
KEBA Việt Nam / Hotline : 0938 906 663
KEBA chuyên cung cấp : Bộ điều khiển KEBA, Bộ điều khiển servo KEBA, Động cơ KEBA, Vòng bi từ tính KEBA, Mô-đun KEBA.
Tự động hóa công nghiệp KEBA là một trong ba lĩnh vực kinh doanh của tập đoàn KEBA, có trụ sở chính tại Linz/Áo từ khi thành lập năm 1968. Với hơn 25 công ty con, KEBA hiện diện trên 15 quốc gia trên thế giới. Các giải pháp tự động hóa của chúng tôi không bắt đầu từ bí quyết công nghệ mà từ nhu cầu của bạn.
KEBA Viet Nam Distributor / Hotline : 0938 906 663 / Email : giau@hgpvietnam.com
KEBA HGP Viet Nam
KeTop T70
KeTop T150
KeTop T155
KeTop T200
KeTop T15x Safe Wireless
KeTop T150/T155 Safe Wireless
KeTop T135
KeTop T135 ECO
KeTop AP 500
OP300 keyboard panels
KeTop OP 300 Keyboard Panels
stationary singletouch panel OP300/400
KeTop OP 300/400 Singletouch
KeTop OP500 Multitouch
KeTop OP 500 Multitouch
KeControl C5
Control KeControl C1
KeControl C1
Robotic control KeDrive D3
KeDrive D3 Control
AI extension module
KeDrive D3
Energy-efficient multi-axis system with single, double and three-axis servo controllers up to 300 A and integrated safety technology.
KeDrive D3 Smart DC Systems
Optimizes energy flows in machines and reduces load peaks through controlled energy storage in the DC link.
Picture of KeDrive D3-AC isolated on a light background
KeDrive D3-AC
Compact AC-powered all-in-one servo controller with up to 3 axes as well as mains filter and braking resistor in just one module.
KeDrive D5
Single-axis controller for apparatus and mechanical engineering. With 24 – 48 V DC, ideal for mobile applications, e.g. in intralogistics.
ServoOne
Single-axis system with up to 450 A. It offers maximum flexibility thanks to various fieldbus profiles, integrated PLC and much more.
ServoOne TL
The solution for high-speed applications – with three-level technology. Ideal for turbo machines and demanding industrial applications.
c-line Drives
The proven single-axis controller, which covers all basic functions for reliable drive solutions in machine and plant engineering.
PitchOne
Optimized for pitch control in wind turbines: rugged, low-maintenance, highly available – with TÜV-certified emergency drive (PLe).
PitchMaster II+
This proven pitch drive is used in wind turbines worldwide – with high integration and availability, robust design and certified functional safety.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
KEBA Việt Nam / Hotline : 0938 906 663
You cannot copy content of this page
